IO development board for...
IO development board for Raspberry Pi Pico Multiple communication ports: x2 I2C, x2 UART, 2 x SPI, x3 analog I/O and x13 digital I/O 6.5-12 V power supply interface Compatible with Lego extensions
IO development board for Raspberry Pi Pico Multiple communication ports: x2 I2C, x2 UART, 2 x SPI, x3 analog I/O and x13 digital I/O 6.5-12 V power supply interface Compatible with Lego extensions
Easily access all pins on your Raspberry Pi Pico to simplify your setups and speed up your prototyping phases Connect your components in seconds thanks to a user-friendly design made for Dupont cables Avoid wiring errors with precise pin labels silk-screened directly on the board Seamlessly...
Grove plug-and-play display Displays up to 32 characters, with support for English, Japanese and Greek alphabets Compatible with Arduino and Raspberry Pi Ideal for displaying temperature or time, or any other project requiring a simple display
Breakout navigation module ideal for surface detection and floor tracking of a robot vacuum cleaner PAA5100JE sensor that uses a low-resolution camera and intelligent algorithms to detect surface movement Very narrow range of 15 to 35 mm, suitable for use with a wide variety of...
Bluetooth LE development board designed for IoT and AI applications Rich interface: 1x reset button, 1x UART, 1x IIC, 1x SPI, 1x NFC, 1x SWD, 11x GPIO, 6x ADC, 1x three-in-one LED, 1x user LED Embedded microphone, embedded antenna and 6 Dof IMU Can be programmed with Arduino,...
Breakout board with uBLOX MAX-M8Q-10 module and SMA female connector for active antennas Quick start, PPS LED and Supercap included to maintain settings during power cycles Suitable for HAB use with maximum altitude of 50000 meters in flight mode TX, RX, TP (PPS output), 3 V supply (2.7 V to 3.6...
It's perfect for integrating into projects - industrial, scientific or just plain fun - and much more affordable than most thermal imaging cameras. Our distribution makes it easy to use the camera with your Raspberry Pi or Arduino, using an I2C and 3-6V power supply. And it's available in two...
Board with the RP2040 microcontroller chip designed by Raspberry Pi in the UK Embeds a 1.28-inch round LCD display Includes temperature sensor, accelerometer and gyroscope Full SDK, C/C++ and MicroPython support
It's perfect for integrating into projects - industrial, scientific or just plain fun - and much more affordable than most thermal imaging cameras. Our distribution makes it easy to use the camera with your Raspberry Pi or Arduino, using an I2C and 3-6V power supply. And it's available in two...
Breakout board with integrated Breadboard, ADC inputs, speaker and 1.54" IPS LCD (240x240 px) Compatible with Raspberry Pi Pico and programmable in C / C ++ and MicroPython 4 x controllable switches, 2 x half-bridge motor drivers, 2 x I2C Breakout Garden sockets Fully assembled...
Measure indoor air quality - total volatile organic compounds (TVOC) and equivalent CO2 (eCO2) - with this digital sensor for Raspberry Pi and Arduino. The SGP30 sensor measures two different types of gases: volatile organic compounds (such as hydrocarbons) and equivalent carbon dioxide (H2...
Breakout board with uBLOX MAX-M8C-1 module with additional power filtering, chip antenna and decoupling capacitor Light weight of only 1.5g Suitable for HAB use with maximum altitude of 50000 meters in flight mode VCC, GND and RX & TX, SCL & SDA for I2C
Use this motion sensor in your DIY projects or drone to accurately measure three different types of motion on three different axes with 16-bit resolution. It also uses low power, so it's ideal for integration into battery-powered projects, and is compatible with Raspberry Pi and Arduino.
A very good environmental sensor ideal for indoor monitoring of temperature, pressure and humidity, or even outdoors in a suitable enclosure. It is compatible with Raspberry Pi and Arduino. If you are an iOS user, there is a Homebridge plugin for the BME280 to allow you to use the sensor for...
Connect up to 6 breakout modules (4 x I2C and 2 x SPI) to your Raspberry Pi Pico Numbered board connection ports and M.2.5 mounting holes to secure the board Reverse polarity protection Compatible with most Breakout modules Pimoroni
A handy little LCD screen for adding readouts to your projects. This 0.96" SPI LCD has a 2:1 aspect ratio, wide viewing angles (IPS) and works with Raspberry Pi or Arduino. It is bright, has excellent resolution and you will be able to display small information such as timers, clocks, sensor...
A bright and clear 1.12" OLED display ideal for adding a small screen to your project. This 128 x 128 pixel white/black monochrome display is ideal for graphing, reading and displaying basic icons. OLEDs have the advantage of being extremely bright and readable, with great contrast. Because...
The BME680 sensor allows you to measure temperature, pressure, humidity and indoor air quality, and is compatible with Raspberry Pi and Arduino! You can use it to monitor all aspects of your indoor environment. Its gas resistances will react to changes in volatile organic compounds and can be...
The RV3028 RTC breakout is perfect for adding timing to your project and, thanks to the small built-in battery, will keep time when your device is turned off. The tiny silver oxide battery (8mAh, included) keeps the RTC running when your device (Raspberry Pi or Arduino) is turned off and can...
A really sophisticated and accurate color and luminance sensor that is compatible with Raspberry Pi and Arduino. In addition to detecting RGB color and light level, it rejects 50/60Hz light noise, has a wide detection range and two LEDs for illumination. This type of sensor is the same one you...
This light and proximity sensor detects light over a wide dynamic range (0.01 lux to 64,000 lux) and proximity in a short range of about 5 cm. The LTR-559 is the same type of sensor you'll find next to your phone's camera that detects when it's next to your ear to disable the touch screen. It's...
These low-power laser-based time-of-flight sensors have high accuracy and sampling rate, and this particular sensor has a wide detection range, from 4 cm to 4 meters. Use it as a proximity sensor, for presence detection, or as a laser tape measure! The speed, accuracy and range make this sensor...
Sharpness, high resolution, wide viewing angles (IPS), this 1.3 " square color LCD screen, 240x240 pixels, will add spice to your projects Raspberry Pi or Arduino. A very sharp and bright screen thanks to its wide viewing angles and protected against polarity inversion.
Special right angle breakout module for Pi 400 Easy installation without soldering Offers 3 additional breakouts 2x I2C (5 pins) + 1x SPI (5 pins) Reverse polarity protection (integrated in the breakouts)