Filtres

Catégorie

Type de produit

Marque

Compatibilité

Connectique

Type de moteur

Prix

€0.00 - €45.00

En stock

Category: Motorization / Controllers modules (Raspberry Pi)

There are 29 products.

Showing 1-24 of 29 item(s)

HAT with Screw Terminal Block...

Expansion board for Raspberry Pi that simplifies the connection of sensors, modules, and electronic components All GPIO connector pins are exposed via screw terminals, providing solid and reliable connections, especially useful for prototyping or permanent installations Integrated...

Price €21.55

Micro servomoteur AD002

x2 180° micro-servo motors with metal gears, to reduce noise during movement Perfect for making D.I.Ys for helicopters, cars and remote-controlled aircraft Stall torque: 2.0 kg/cm (4.8 V) Operating speed: 0.11 seconds/60 degrees (4.8 V)

Price €9.90

Robot Pico expansion board

Expansion module to simplify robotics projects Wide range of connectors: 7 Grove connectors, x2 PIN connectors with silk-screen printing for easy connection Integrated DC motor driver, designed to manage either 2 brush DC motors, or a single bipolar/unipolar stepper motor, and even 4 servomotors...

Price €11.01
Regular price €16.94
  • -35%
  • Out-of-Stock

2kg 360° servo motor

Geekservo 2kg 360° servo motor Suitable for medium and large projects Compatible with lego Dual 360° output axes

Price €14.40

Sonoff Zigbee radiator...

Control the temperature room by room for a personalized level of comfort Thanks to smart, targeted heating, you can reduce your energy costs Compatible with most radiators with included adapters Built-in temperature display for instant heating control

Price €33.95

Pan-Tilt HAT for Raspberry Pi

This is a pan-tilt kit designed for Raspberry Pi. With the integrated PCA9685 PWM chip and TSL2581 ambient light sensor, it allows the Pi to control camera movement and detect light intensity via the I2C interface.

Price €19.99

Feetech FS90R servo motor

Feetech / FITEC 9g Micro Servo Analog servo with 360 degrees continuous rotation 6 V - 1.5 kg / cm Ideal for model making and D.I.Y, to create a radio controlled device (helicopters, planes, drones, robots, cars, ...)

Price €6.98

Stepper motor Uln2003

LONGRUNNER stepper motor with standard interface and servo motor included Compatible with 2560, 1280 DSP, STM32, Raspberry Pi and Arduino IDE LK67 4-phase LED A, B, C, D indicates the operating status of the stepper motor. Pull-up torque: > 34.3 mN.m (120 Hz); Unwind torque: > 34.3...

Price €2.95

Keybow 2040 Mechanical Keyboard...

Mini mechanical keyboard kit with 16 clickable keys (4x4) for self-assembly (no soldering) Low-latency input and high reliability with the RP2040 microcontroller Raspberry Pi Equipped with Kailh Speed switches and intelligent transparent DSA keys with fully customizable RGB lighting...

Price €59.00

Stepper motor HAT for Raspberry Pi

HAT engine compatible Raspberry Pi, Jetson Nano Embeds x40 PIN GPIO 6 microstep modes available, configured with DIP switches: full step, half step, 1/4 step, 1/8 step, 1/16 step and 1/32 step Ideal for 3D printer projects, sculpting machine, mechanical arm...

Price €14.55

PAA5100JE near optical flow SPI...

Breakout navigation module ideal for surface detection and floor tracking of a robot vacuum cleaner PAA5100JE sensor that uses a low-resolution camera and intelligent algorithms to detect surface movement Very narrow range of 15 to 35 mm, suitable for use with a wide variety of...

Price €24.95
  • Out-of-Stock

Servo Driver HAT

Needless to say, the Raspberry Pi is quite powerful in most cases, but it is not very good at providing accurate PWM output. You may have tried to control a robotic arm or hexapod using the Pi, but are ultimately frustrated because of the limited number of PWM outputs and servo jitter. Now that...

Price €13.96

HAT 2 RS485 channels and 1 CAN...

CAN RS485 isolated extension HAT 1 CAN channel : MCP2515 controller with CAN transceiver 2 RS485 channels: SC16IS752 and SP3485 dual chip combination Standard 40PIN GPIO header Raspberry Pi

Price €29.94
  • Out-of-Stock

Engine 2kg

Geekservo 2kg 360° motor Compatible with the famous brick building set Suitable for medium and large projects Dual 360° output axes

Price €7.80

Motor driver for Raspberry Pi Pico

Motor driver for Raspberry Pi Pico, ideal for buggy projects Allows Raspberry Pi Pico to drive two motors simultaneously or a single stepper motor Includes DRV8833 motor driver IC with short circuit, overcurrent and heat protection Éequipped with an on/off switch and a power status LED

Price €13.95

Tower Pro 180° Servo Motor

High capacity servo with all metal gears and 1 bearing Comes with 3 servo arms Features : Weight : 13.4grs Dimensions: 22.8x12.2x28.5 mm Torque : 1.8kgs(4.8V)/2.2kgs(6V) Speed : 0.1sec/60degrees (4.8v)/ 0.08sec/60degrees(6V) Operating voltage : 4.8V/ 6V Operating temperature: 0 /+55°

Price €4.90

Geekservo engine

HighqualityGeekservo motor Compatible with the famous brick building game Programmable with Makecode Javascript, microPython, C++ Operating voltage from 3.3 to 6V

Price €5.46

Wheel + gear motor DC 3-6v for...

Engine: 1. Voltage: DC 3V - 6V 2. 100 mA - 120mA 3. Reduction ratio: 48 : 1 4. Rpm (with tires) : 100-240 5. Tire diameter : 65mm 6. Car speed ( m / minute ) : 20-48 7. Engine weight ( g ) : 29 / each 8. Engine size: 70mm x 22mm x 18mm Tire:1. Center hole: 5.3mm x 3.66mm 2. Wheel...

Price €2.90

MOTOR DRIVER for Raspberry Pi

Drive two DC motors simultaneously Specially designed for Raspberry Pi, this Motor Driver HAT allows you to drive two DC motors at the same time. Controlled via an I2C interface, this accessory is ideal for your intelligent mobile robots.

Price €16.95

Motor driver card

Motor driver card ideal for mobile robots Équiped with 4 LED lights and 4 test buttons Regenerative braking provides better control of motor speed Compatibility with Arduino and Raspberry Pi and micro:bit controllers

Price €4.50

Programmable Rotary Camera...

This Pan-Tilt Kit is the perfect way to give your project a full range of programmable motion. The pan-tilt can rotate approximately 180° from side to side and can tilt up and down around 150°. Comes in a kit with two included 38mm x 36mm micro servo motors (GS-90 or GS-92 Type) and space to...

Price €6.90
  • On sale!

ADS1015 Breakout Card

This ADS1015 ADC (analog-to-digital converter) package has three channels that can read voltages from -24 V to +24 V at sampling rates up to 3.3 KHz with 12-bit resolution. It is compatible with Raspberry Pi and Arduino and is ideal for measuring voltages quickly and accurately over a wide...

Price €14.95