Featuring the same 5 megapixel OV5647 camera sensor as the original Raspberry Pi v1 Camera Module, this tiny Camera Module will be the perfect companion to your Raspberry Pi 0!
Comes with an integrated camera cable Raspberry Pi Zero and is therefore compatible with the Raspberry Pi 0 only.
The 3-degree accelerometer sensor measures acceleration on 3 axes. If you need simple and reliable motion detection for your project, then this is a great choice!
It also has some clever features built in. It has interrupts for motion in each axis, double tap detection and free fall detection....
This tiny button cell holder is ideal for small portable projects. It holds two 20mm button cells (the most popular size is 2032) to generate a nominal 6V. The 20mm button batteries are popular because they are used in keychain lights, so they are easy to obtain and relatively inexpensive. They...
This high quality aluminum case offers space for your Raspberry Pi incl. StromPi 3 and Battery Hat (also -XL). A removable cover over the GPIO bar keeps it easily accessible.
The RB-StromPi3-PCB allows to use the power button function. In addition, the fan can be used with this board and...
Jumper Kit WJW-70B
Product Features:
10pcs of 14 different lengths = 140pcs/kit
Material: tinned copper PVC insulation
Thickness: #22 AWG wire
Stripped 0.25" and 90 ˚ bent on both ends
Connect your own PCB to a Raspberry Pi with this full-size female header. The female part of the header is about 8.5mm high, which is handy for small HATs that don't clean USB/Ethernet sockets. This header has 3mm pins, compared to our stackable version which is the same basic height, but has...
Rii Mini i10 Keyboard (AZERTY) with USB receiver module - Wi-Fi
Rechargeable lithium battery (standby time of 700 hours)
Compatible with PC (Windows - Mac - Linux) , tablets and smartphones ( Android - Windows - iOS keyboard only), video game consoles (PS3 - Xbox 360) , HTPC Mini PC...
Motor driver card ideal for mobile robots
Équiped with 4 LED lights and 4 test buttons
Regenerative braking provides better control of motor speed
Compatibility with Arduino and Raspberry Pi and micro:bit controllers
7x17 LED array (119 white LEDs) with individual brightness control of each LED
Compatible with Raspberry Pi Pico and programmable in C / C ++ and MicroPython
4 x programmable touch buttons and IS31FL3731 LED array driver chip
Fully assembled, pre-soldered female sockets for attachment to the...
Pimoroni has developed a small and elegant, fully adjustable stand for the camera Raspberry Pi!
This bracket is ideal for the desk or with a tripod.
The kit comes with 5 x M2 nuts, 5 x M2 bolts and 2 x black acrylic mounting plates.
Highly compatible controller: for popular PlayStation and Xbox game consoles, PC, Steam and Android devices
Multiple connectivity: via Bluetooth, 2.4 GHz or wired connection
Advanced features: dual-motor vibration, programmable buttons, precise joysticks and pressure-sensitive...
It is a 2-channel RS232 expansion HAT designed for Raspberry Pi which adopts SC16IS752 + SP3232 solution, with built-in protection circuits such as power supply isolation, ADI magnetic isolation and TVS diode, etc.It is easy to control the 2-channel RS232 via SPI interface. With fast...
DC motor size 130
Suitable for automation/robotic projects
Wider operating range than most DC motors: 4.5 to 9VDC
Controllable with a Motor Shield or a Arduino
This Pan-Tilt Kit is the perfect way to give your project a full range of programmable motion. The pan-tilt can rotate approximately 180° from side to side and can tilt up and down around 150°. Comes in a kit with two included 38mm x 36mm micro servo motors (GS-90 or GS-92 Type) and space to...
Drive two DC motors simultaneously
Specially designed for Raspberry Pi, this Motor Driver HAT allows you to drive two DC motors at the same time. Controlled via an I2C interface, this accessory is ideal for your intelligent mobile robots.
Composed of 2 rows of 20 Pin is 40 PIN in total.
This GPIO cable is 150 mm long.
It allows you to connect your new Rapberry Pi B+
Ideal for programming, dialoguing with a breadboard, sending and receiving data.
Not compatible with Model B and A
Designed to protect your Raspberry Pi 4 Model B and its variants from all the little bumps and scratches, this Raspberry Pi 4 case is made of high quality molded plastic, making it both elegant and light. The design of the case is modular, it is composed of several parts that fit into each other,...
An ePaper / eInk pHAT display designed for the Raspberry Pi Zero.This is one of the first low power displays for the Pi Zero minicomputer.
EPaper / eInk is a display technology that mimics the appearance of ink on normal paper. Unlike conventional displays, ePaper reflects light - just...