Category: Accessories
Analog to digital converter
The MCP3008 is a 10-bit successive approximation analog-to-digital converter with an integrated sample-and-hold circuit. It is programmable to provide four pairs of pseudo-differential inputs or eight single-ended inputs. ........
- Out-of-Stock
Explore HAT Pro
Ideal for motor drives, this prototyping board features analog sensors and an interface to 5V systems.
Aluminum housing for LattePanda...
Passive-cooled aluminum alloy enclosure for excellent heat dissipation-ideal for keeping your card's full functionality over time Accessible ports and numbered GPIOs for ease of use throughout your project Designed for the LattePanda Alpha board Assembled protection, quick and...
- Out-of-Stock
Pi zero box
To protect your Pi Zero, let yourself be seduced by this small, simple and affordable case. This case is lightweight and ideal for mounting on any surface. No tools are required for mounting or dismounting.
3x4 Matrix Keypad Membrane + Extras
Enter your secret key into this digital matrix keyboard. This 12-button keypad, arranged in a 3x4 telephone line grid, is made of a thin, flexible membrane with an adhesive backing so you can flexible membrane with an adhesive backing so you can attach it to any surface.
Joy-It Aluminum case for...
This sturdy case made of high-quality silver aluminum can be assembled in a few steps and offers your Raspberry Pi 4 B sufficient protection thanks to its robust construction. All connections, including the SD card slot and GPIO ports, are easily accessible. Material: aluminum Color: silver...
EXTENSION SERIES
Increase the capabilities of your Raspberry Pi The original Raspberry Pi has only one UART port with 1 channel. With this serial extension, you have a UART with two channels as well as 8 GPIOs programmable via I2C. The LEDs integrated in the extension allow you to monitor the UART operating status.
Protective case with stand for Pi4
A high quality acrylic case for Raspberry Pi4 with a fan slot and integrated mounting.
Set of 4 led - 2 infrared...
LOT OF 4 LED - 2 infrared emitters 5mm and 2 receiver diodes Size: 5MM
Pan-Tilt HAT Kit
Ideal for a mini video surveillance system, this set of horizontal and vertical motion servos will give you the movement of the Pi camera with a minimum of fuss.Pan-Tilt HAT allows you to mount and control one of our panoramic modules right on top of your Raspberry Pi. The HAT and its on-board...
- Out-of-Stock
Raspberry PI case with fan mount
Very practical little box for Raspberry Pi 3/2/B+ including different openings to access the GPIO, to fix a fan As well as openings on the back for wall mounting.
Halo LED RGB Extension Module
Module composed of 8 programmable RGB lights Compatible Arduino, Micro:bit and Raspberry Pi Pico 3 possible connection methods: alligator clip, Dupont cable and PH 2.0 cable High brightness (256 brightness levels) - ideal for creating lighting effects
- Out-of-Stock
TGP01S-A130 DC motor
DC motor ideal for robotics, model making, ... Reduction ratio: 1/48, 1/120, 1/180, 1/220, 1/256, 1/288, Load current: 0.1-0.35A
- Out-of-Stock
Raspberry Pi Build HAT
Have a fun and creative learning experience with LEGO® and Raspberry Pi Raspberry Pi Build HAT add-on board with a Raspberry Pi RP2040 microcontroller designed in collaboration with LEGO® Education and compatible with all LEGO® models Raspberry Pi Control up to 4 LEGO® extensions such as...
- Out-of-Stock
Camera Module v2 8MP
To capture beautiful shots with your Raspberry Pi, the new Camera Module v2 Official Camera Module features a sensor Sony IMX219 sensor with fixed focus, for a high native resolution of 8 Megapixels! Useful for time-lapse activities, motion detection or security camera, the module is easily...
- Out-of-Stock
Assembled housing with...
High quality professional ABS case designed specifically for the Raspberry Pi 4. Includes a built-in power switch for safe start-up and shut-down.
Potentiometer
These are our favorite mini potentiometers, perfect for breadboarding and prototyping. They have a long grippy knob and with 0.1" spacing they plug into breadboards or perfboards with ease. TECHNICAL DETAILS Body size: 9.5mm x 9.5mm x 4.9mmRotation: 270 degrees
Official Raspberry PI 3 display...
This official screen holder has been specially designed to house the official 7" screen (first generation only) Back-over for Raspberry Pi 3
Screen mount for Raspberry PI
Very practical to mount your raspberry behind a screen. This mount works on many standard screens. This mount for Raspberry Pi works with or without a case (case not included!) and allows you to hang your Pi on different supports.
- Online only
TFP401 HDMI / DVI TTL 40 Pin...
Discover your HDMI Mini Decoder card! So small and so simple, you can use this card as an all-in-one driver for TTL displays, or to decode HDMI / DVI video. This is the contact version! So you can combine it with to a resistive touchscreen! This driver is specifically designed for compact...
- On sale!
- Out-of-Stock
Skywriter HAT
Able to detect the position of your fingers in the air, the Skywriter HAT acts as a gesture sensor and allows you to control your Raspberry Pi with a simple finger movement! With a sensing distance of up to 5cm, you can mount your Skywriter HAT behind non-conductive material (like acrylic or...
- Out-of-Stock
Official 7" 800x480 screen mount
Protect your Official 7" touchscreen Raspberry Pi. 3 layers of plastic provide support and protection to the back of the screen and 2 feet hold your screen Available in six colors! NB: the screen and Raspberry Pi are not included.
Français
Español
Italiano
Deutsch
Portugais