Filtres

Sous-Catégorie

Catégorie

Type de produit

Marque

Compatibilité

Mémoire vive (RAM)

Connectique

Résolution

Type de batterie

Type de moteur

Fonctions

Couleur

Couleur(s)

Prix

€0.00 - €285.00

En stock

Wi-Fi

Matière

Technologie d'affichage

Type de stockage

Bluetooth

Category: Extensions and Components

There are 194 products.

Showing 49-72 of 194 item(s)

Ethernet to UART converter for...

2-channel Ethernet to UART converter for Raspberry Pi Pico Supports seamless transmission of 2-CH Ethernet to UART data Integrated female pin header for direct attachment to theroches of the Raspberry Pi Pico 10/100M auto-negotiating Ethernet interface

Price €11.94

Experimental kit

Very handy little kit designed to be used with your Arduino. It contains everything needed for a first use with a Arduino, it includes many of the most popular accessories for electronic projects. Breadboard, jumper, color LEDs, resistors, buzzer, etc., all come in their own convenient box for...

Price €21.60
  • On sale!

Motion Sensor ICM20948 Breakout

Use this motion sensor in your DIY projects or drone to accurately measure three different types of motion on three different axes with 16-bit resolution. It also uses low power, so it's ideal for integration into battery-powered projects, and is compatible with Raspberry Pi and Arduino.

Price €16.96

Set of 10 switch buttons

These switch buttons can conveniently function as a standard input button on a PCB or breadboard. Pack of 10 units. Dimensions: 6mmx5mmx5mm Available in red

Price €0.95

BME280 Breakout environmental...

A very good environmental sensor ideal for indoor monitoring of temperature, pressure and humidity, or even outdoors in a suitable enclosure. It is compatible with Raspberry Pi and Arduino. If you are an iOS user, there is a Homebridge plugin for the BME280 to allow you to use the sensor for...

Price €15.88

Visible spectrum / spectral...

Spectral color sensor ideal for creating a compact spectrometer Compatible with Arduino, STM32, Raspberry Pi and various other platforms Allows to measure color temperature and identify colors Dedicated channel to detect ambient light flicker

Price €18.95

Maker for Raspberry Pi Pico

Maker for Raspberry Pi Pico ideal for robotics and STEM education Bottom layer of the board with pinout diagram Useful LED indicator for troubleshooting and testing Easy access to all GPIO pins

Price €17.99

Contact clip connectors for 9V...

Clip-on connectors for 9V batteries Made of solid plastic and metal Ideal for easily replacing a faulty battery contact connector on your electronic device without stripping the wire Pack of 8 pieces

Price €3.30

Pico Breakout Garden Base...

Connect up to 6 breakout modules (4 x I2C and 2 x SPI) to your Raspberry Pi Pico Numbered board connection ports and M.2.5 mounting holes to secure the board Reverse polarity protection Compatible with most Breakout modules Pimoroni

Price €10.47
Regular price €14.95
  • -30%
  • -30%

HAT 2 RS485 channels and 1 CAN...

CAN RS485 isolated extension HAT 1 CAN channel : MCP2515 controller with CAN transceiver 2 RS485 channels: SC16IS752 and SP3485 dual chip combination Standard 40PIN GPIO header Raspberry Pi

Price €29.94
  • Out-of-Stock

Insulation tube kit

Material: Polyolefin, shrink ratio: 2: 1 (shrinks to half the diameter provided) Suitable for electrical insulation, wire bundling, color coding, mechanical protection, wire/cable joints and daily repairs, etc. Comes with 530 pcs assorted heat shrink tube in plastic box, 5 colors (yellow, blue,...

Price €5.95

0.96" (160 x 80) SPI color LCD...

A handy little LCD screen for adding readouts to your projects. This 0.96" SPI LCD has a 2:1 aspect ratio, wide viewing angles (IPS) and works with Raspberry Pi or Arduino. It is bright, has excellent resolution and you will be able to display small information such as timers, clocks, sensor...

Price €19.45

Capacitive fingerprint sensor

High precision fingerprint sensor with 360° verification Based on a high-performance Cortex processor Compatible with Raspberry Pi and STM32 thanks to the integrated UART connector Capacitive sensitive detection, so verification is done quickly upon touch

Price €23.40

Carte E/S pour ODROID-M1S

I/O board featuring power button, reset button, USB 2.0 host port, 3.5 mm audio output X6 GPIO header pin for I2C and UART Compatible with ODROID-M1S board Simple connection via ODROID-M1S 14-pin header connector

Price €2.52
Regular price €4.20
  • -40%
  • -40%

Keybow 2040 Mechanical Keyboard...

Mini mechanical keyboard kit with 16 clickable keys (4x4) for self-assembly (no soldering) Low-latency input and high reliability with the RP2040 microcontroller Raspberry Pi Equipped with Kailh Speed switches and intelligent transparent DSA keys with fully customizable RGB lighting...

Price €59.00

LNA amplifier modules with SAW...

Low Noise Amplifier Modules (LNA) based on SAW bandpass filter Designed to pass between a software defined radio receiver and an antenna and reduce out-of-band intermodulation while providing additional gain for increased sensitivity Compatible with most USB SDR dongles such as RTL...

Price €47.64

Electronic package

1 pcs RGB led CC25 pcs led (White, Red, Green, Yellow, Blue)5 pcs PN2222, BC547 and BC5575 pcs 1n4001 diodes1 pcs Thermistor5 pcs 22pf and 1 uf capacitor2 pcs 50 V 10 uf capacitor and 50 V 100 UF capacitor1 pcs potentiometer1 pcs passive buzzer1 pcs 74HC595N1 pcs MAX72191 pcs L293D1 pcs Infrared...

Price €9.90

Breakout 1.12" OLED screen - SPI

A bright and clear 1.12" OLED display ideal for adding a small screen to your project. This 128 x 128 pixel white/black monochrome display is ideal for graphing, reading and displaying basic icons. OLEDs have the advantage of being extremely bright and readable, with great contrast. Because...

Price €19.95

Inventor's kit for micro:bit

The BBC Micro: Bit Inventor's Kit is a great way to get started with programming and hardware interaction with the BBC Micro: Bit. This inventor's kit contains everything you need to practice 10 experiments, including using LEDs, motors, LDRs and capacitors. To get you started, we provide an...

Price €27.95

Heat sink for Raspberry Pi4

This large heat sink (40x30x5mm) in black will allow you to enjoy additional thermal performance of power hungry tasks. Perfect for the Raspberry Pi 4! Designed for the new Pibow Coupe 4 case at the waist, it is only 5mm high and should therefore work with most of our HAT, pHAT and other Pi...

Price €2.84

BME680 Breakout - Temperature,...

The BME680 sensor allows you to measure temperature, pressure, humidity and indoor air quality, and is compatible with Raspberry Pi and Arduino! You can use it to monitor all aspects of your indoor environment. Its gas resistances will react to changes in volatile organic compounds and can be...

Price €22.96

HAT Networks 5G / 4G / 3G for...

HAT network extension with antennas for Raspberry Pi (GPIO - 40 PIN) Support for 5G / 4G / 3G networks, Multi-Band / Multimode Based on Qualcomm Snapdragon X55 platform SIM card slot, supports 1.8 V / 3 V SIM card

Price €282.00

RV3028 Breakout Real Time Clock

The RV3028 RTC breakout is perfect for adding timing to your project and, thanks to the small built-in battery, will keep time when your device is turned off. The tiny silver oxide battery (8mAh, included) keeps the RTC running when your device (Raspberry Pi or Arduino) is turned off and can...

Price €17.95
  • Out-of-Stock