Filtres

Catégorie

Type de produit

Marque

Compatibilité

Connectique

Résolution

Fonctions

Prix

€0.00 - €60.00

En stock

Longueur du câble

Matière

Category: Modules / Sensors

There are 74 products.

Showing 49-72 of 74 item(s)

Ultrasonic sensor HC-SR05

An IO trigger interval is used to give at least a 10us high signal;The module automatically sends 8 40KHz to detect whether a signal is returned. A signal is returned, and a high level of high level is transmitted through the I/O output. The test distance = (the time of high level * the speed of...

Price €4.90

Modulino Latch Relay

The Modulino Latch Relay is a bistable relay module designed to add a compact and reliable power switch to your automation, home automation, or IoT projects Based on the standard Modulino form factor, this module integrates in seconds with an Arduino UNO R4 WiFi, UNO Q, Nano R4, Nesso...

Price €9.90
  • Out-of-Stock

BME680 Breakout - Temperature,...

The BME680 sensor allows you to measure temperature, pressure, humidity and indoor air quality, and is compatible with Raspberry Pi and Arduino! You can use it to monitor all aspects of your indoor environment. Its gas resistances will react to changes in volatile organic compounds and can be...

Price €22.96

ARDUINO MKR THERM SHIELD

Shield designed for accurate and wide temperature measurements Thermocouple to digital converter ideal for accurate and wide temperature measurements Measure extreme temperatures: from -200°C to +700°C Type K female connector

Price €37.85
Regular price €49.80
  • -24%
  • -24%

Light and proximity sensor...

This light and proximity sensor detects light over a wide dynamic range (0.01 lux to 64,000 lux) and proximity in a short range of about 5 cm. The LTR-559 is the same type of sensor you'll find next to your phone's camera that detects when it's next to your ear to disable the touch screen. It's...

Price €9.95

Grove - EMG Detector

Muscle Detector: collects your muscle signal, subjects it to a second amplifier and filter, and then generates an output signal interpreted by a Arduino Includes x6 disposable surface electrodes, for more precise measurements Cable length: 1 m Plug-and-play via Grove connector

Price €29.94

Reed magnetron sensor module

Reed and magnetron switch module Composed of two magnetic materials and metallic reed contacts The contacts are encapsulated in a glass tube filled with gas Use: for counting, limiting, for a bicycle odometer or a door alarm

Price €5.50

Raspberry Pi Sense HAT

Extension with multiple sensors (temperature, humidity, magnetometer…), a 64x64 LED matrix, and a mini joystick. Designed for measurements, experiments and Python programming Easily connects to the Raspberry Pi via the 40 GPIO pins Compatible with the Raspberry Pi 5, as well as...

Price €35.70
  • On sale!

Heart rate sensor

Place this sensor on your finger to know your heart rate! Embeds an ultra-bright infrared LED and a phototransistor to detect the pulse Shine the bright LED on one side of your finger while the phototransistor on the other side detects the amount of light transmitted The red LED...

Price €5.50

Grove - GSR sensor

GSR (Galvanic Skin Response) sensor to reflect your emotions simply by placing two electrodes next to each other Ideal for monitoring sleep quality, lie detector, etc. Adjust sensitivity via potentiometer Easy-to-read analog voltage output

Price €11.88

Clippable Kitronik detection card

Detect light, objects and follow lines with the clip-on sensor card for the BBC bit microphone. Attach directly to Micro:bit or connect with alligator cables.

Price €5.20

K-thermocouple converter module

MAX6675 K-thermocouple to digital converter module with signal amplification, cold junction compensation, linearization, A/D conversion and digital SPI serial output functions The MAX6675 is integrated with a cold junction compensation circuit 3-bit SPI serial interface, which...

Price €6.72
  • On sale!

I2C digital ultraviolet sensor

I2C digital UV sensor module designed to measure ultraviolet and visible light Sensitive detection and fast response sensor Supports interrupt output, programmable upper/lower threshold Compatible with Raspberry Pi, Arduino, STM32

Price €9.95

Luminance and color sensor...

A really sophisticated and accurate color and luminance sensor that is compatible with Raspberry Pi and Arduino. In addition to detecting RGB color and light level, it rejects 50/60Hz light noise, has a wide detection range and two LEDs for illumination. This type of sensor is the same one you...

Price €12.91

Enviro:bit

Capture the world around you with enviro:bit! It has sensors for air and weather, color and light, and sound, and connects directly to your micro: bit. Just place your micro: bit, then code enviro:bit with the block-based Microsoft MakeCode editor, or with MicroPython in the Mu code editor. The...

Price €10.80
Regular price €18.00
  • -40%
  • -40%

Soil moisture sensor for micro bit

The Prong Soil Moisture Sensor for BBC microbit is a sensor card that can be mounted directly on a BBC microbit to monitor the moisture present in the soil. The two conductive prongs are placed in the soil. Any water or moisture in the soil will lead to an analog voltage readable by the BBC...

Price €4.95

MCP9600 Breakout Thermocouple...

This MCP9600 amplifier works with eight different types of thermocouples and has built-in temperature alerts. It is compatible with Raspberry Pi, Arduino and with HAT garden Breakout without soldering. Thermocouples are temperature sensors that are well suited for more industrial use where...

Price €22.96

Motion sensor PMW3901

This sophisticated optical flow sensor detects the movement of surfaces in front of it, from ~ 80 mm to infinity! The PMW3901 is a clever little sensor that uses a low-resolution camera and smart algorithms to detect the motion of surfaces. A great use for this is to detect and correct the drift...

Price €24.55

Sensor:bit for micro:bit

Sensor: bit is a card based on micro: bit. It extends all the IO ports available on micro: bit and extracted them as GVS. With this board we can extend various 3V electrical brick modules such as LED lamps, photocells, etc. The board has a built-in buzzer and an audio jack, which allows us to...

Price €5.22
Regular price €6.96
  • -25%
  • -25%

Tracing module Raspberry Pi

Add a tracker to your Raspberry For an optimal use of your Raspberry Pi, you can install a tracking module. This infrared reflection sensor can be used for: electricity meter, paper detection in printer, barrier detection, black and white line detection..

Price €3.20

Temperature, pressure and...

A fast and accurate environmental sensor that can measure temperature, pressure and altitude. If you're looking for a simple temperature and pressure sensor, then this is the one to choose.Accurate (± 1 hPa, ± 1.0 ° C, ± 1 meter), and ideal for keeping track of temperatures around your home or...

Price €11.35
  • Out-of-Stock

Smoke sensor, heart rate,...

You can use it as a fun way to see your heart rate or have LEDs or lights pulsate to the rhythm of your heart. It is compatible Raspberry Pi and Arduino. This sensor has three LEDs - green, red and infrared - and photodetectors that can be used together to detect the amount of light reflected...

Price €27.95
  • Out-of-Stock

ARDUINO MKR 485 SHIELD

Want to add serial communications to your device using the RS-485 protocol? The Arduino MKR 485 shield will provide the industrial connectivity you need.

Price €39.00
  • On sale!
  • Out-of-Stock

6-channel spectral sensor AS7262...

Detect six distinct channels of visible light with this spectral sensor. Unlike normal RGB color sensors, with the AS7262, you'll get six bands of color readings that roughly translate into red, orange, yellow, green, blue and violet. The two built-in white LEDs allow you to illuminate...

Price €23.40
  • Out-of-Stock