This Pi Zero USB adapter converts the Zero's Micro USB B port into a full-size USB A port so you can plug in your mouse, keyboard, or any other required device! It's an OTG (on-the-go) host cable, which means your Zero can act as a host (master) or client device.
Features:
Micro USB B (male)...
FT232RL chip
RXD / TXD transceiver communication indicator
5 V or 3.3 V USB power supply (switch via jumper)
With overcurrent protection (500mA self-restoring fuse)
USB to UART adapter with the new CH343G chip version
Ideal for connecting your various peripherals while enjoying stable performance
Baud rates: 50bps ~ 6Mbps
Compatible with Windows 7/8/8.1/10/11, Linux, Mac, Android
Adapter allowing to move the GPIO port to make it more accessible
Designed specifically for the Raspberry Pi 400
Labeled and color coded male headers
Plug-n-Play connection
GPIO expansion card to double the number of available GPIO ports
Designed specifically for the Raspberry Pi 400
Labeled and color coded male headers (2 x 40 PIN)
Plug-n-Play connection
Compatible with all Type-C devices, this cable lets you recharge your gadgets while transferring data securely
Right-angle bending minimizes stress on cable and connector, without risk of premature wear
90-degree angle connector
One-meter cable length
Dual GPIO connection board, x20 horizontal and x20 vertical
Connecting your peripherals horizontally and/or vertically has never been easier!
For quick and easy use of extended peripherals
Compatible with ODROID-N2, -C4 and -M1 boards
The Coral USB Accelerator adds an Edge TPU coprocessor to your system and enables high-speed machine learning inferences on a wide range of systems, simply by connecting it to a USB port.
2-channel Ethernet to UART converter for Raspberry Pi Pico
Supports seamless transmission of 2-CH Ethernet to UART data
Integrated female pin header for direct attachment to theroches of the Raspberry Pi Pico
10/100M auto-negotiating Ethernet interface
Cables combining SATA Data (7-pin) and Power (Mini 4-pin to SATA 15-pin) connections
1 SATA data cable (7-pin) – SATA III 6 Gb/s compatibility with latches and backward compatibility with SATA I/II
1 SATA power cable, with Mini 4-pin (2.54 mm) → SATA 15-pin connector, AWG 18 wiring...
2 channel UART to Ethernet converter compatible with Raspberry Pi, Arduino and STM32
Facilitates communication between UART TTL and RJ45 Ethernet, enabling transparent bidirectional data transmission
Includes features such as fast data rate, low power consumption and high stability...
Easily provides a wired Gigabit Ethernet connection
Incorporates the original Realtek RTL8153 high performance controller
Plug-and-play connection, driverless, and multi-system compatible such as Win7/8/8.1/10, Mac, Linux, Android ...
Comes with its USB extension cable
USB A Male - Micro B Male cable version 1M and 3M
USB 2.0 compatible Micro USB cable
Data transfer rate up to 60MB/s
Ideal for connecting and charging your devices
USB 2.0 hub with on/off switch
Transfer rate up to 480 Mbps
Plug-n-Play connection - No driver installation required
2 versions available: USB to USB 7 ports and Micro-USB to USB 4 ports
1m shielded RJ45/LAN CAT6 extension cable with SSTP certification
Stable bandwidth up to 250 MHz
Copper conductors and gold-plated connectors
Up to 1000 MBps transfer speed
Connect your own PCB to a Raspberry Pi B+ with this (extra high) female head which allows you to gain 16,5mm of height: When you place a PCB on your Raspberry Pi it lights up the Ethernet and USB sockets.
Versatile adapter designed to connect your Zigbee, Thread, or Matter devices to Home Assistant
Optimized antenna and high-performance chip for a stable and responsive connection, delivering four times the speed of the ZBT-1 version
Native plug-and-play solution in Home Assistant,...
Connect your own PCB to a Raspberry Pi with this full-size female header. The female part of the header is about 8.5mm high, which is handy for small HATs that don't clean USB/Ethernet sockets. This header has 3mm pins, compared to our stackable version which is the same basic height, but has...
Composed of 2 rows of 20 Pin is 40 PIN in total.
This GPIO cable is 150 mm long.
It allows you to connect your new Rapberry Pi B+
Ideal for programming, dialoguing with a breadboard, sending and receiving data.
Not compatible with Model B and A
This USB HUB has four USB 2.0 ports each with a maximum total transmission speed of 480 MBps. All four ports are powered by the standard USB cable. There is also an on/off switch that controls all four USB ports. There is one port for an external power supply, but it is connected directly to the...
This adapter male 2x20 pin adapter adapter is a great way to add PINs to your pINs to your Raspberry PI 0 or prototyping board. Requires soldering.
The color coding is nice and simple:
Red = 5V
Yellow = 3V3
Black = GND
Blue = DNC (I2C inverted)