Filtres

Catégorie

Type de produit

Marque

Compatibilité

Connectique

Résolution

Couleur(s)

Prix

€0.00 - €270.00

En stock

Technologie d'affichage

Montage nécessaire

Category: Multi-function modules (Raspberry Pi)

There are 46 products.

Showing 25-46 of 46 item(s)

Kit Pro V2 de capteur/mètre de...

Industrial pH sensor designed for continuous monitoring with a service life in excess of 4380 hours Measures pH with an accuracy of ±0.1 at 25°C and is easily calibrated with two standard solutions (pH 4.0 and 7.0) Compatible with Arduino, LattePanda and other consumer...

Price €69.00

Google USB Coral - Edge AI...

The Coral USB Accelerator adds an Edge TPU coprocessor to your system and enables high-speed machine learning inferences on a wide range of systems, simply by connecting it to a USB port.

Price €89.95
  • Out-of-Stock

Breakout Distance Sensor VL53L1X

These low-power laser-based time-of-flight sensors have high accuracy and sampling rate, and this particular sensor has a wide detection range, from 4 cm to 4 meters. Use it as a proximity sensor, for presence detection, or as a laser tape measure! The speed, accuracy and range make this sensor...

Price €18.00

Breakout Pico Explorer Base Map

Breakout board with integrated Breadboard, ADC inputs, speaker and 1.54" IPS LCD (240x240 px) Compatible with Raspberry Pi Pico and programmable in C / C ++ and MicroPython 4 x controllable switches, 2 x half-bridge motor drivers, 2 x I2C Breakout Garden sockets Fully assembled...

Price €29.40

SGP30 Breakout air quality sensor

Measure indoor air quality - total volatile organic compounds (TVOC) and equivalent CO2 (eCO2) - with this digital sensor for Raspberry Pi and Arduino. The SGP30 sensor measures two different types of gases: volatile organic compounds (such as hydrocarbons) and equivalent carbon dioxide (H2...

Price €21.00

I2C digital ultraviolet sensor

I2C digital UV sensor module designed to measure ultraviolet and visible light Sensitive detection and fast response sensor Supports interrupt output, programmable upper/lower threshold Compatible with Raspberry Pi, Arduino, STM32

Price €9.95

Grove - GSR sensor

GSR (Galvanic Skin Response) sensor to reflect your emotions simply by placing two electrodes next to each other Ideal for monitoring sleep quality, lie detector, etc. Adjust sensitivity via potentiometer Easy-to-read analog voltage output

Price €11.88

Raspberry Pi Sense HAT

Extension with multiple sensors (temperature, humidity, magnetometer…), a 64x64 LED matrix, and a mini joystick. Designed for measurements, experiments and Python programming Easily connects to the Raspberry Pi via the 40 GPIO pins Compatible with the Raspberry Pi 5, as well as...

Price €35.70
  • On sale!

Pi Cobbler Plus Breakout Kit...

The Pi Cobbler Plus is an extension specifically designed for the Raspberry Pi. It can support GPIO, I2C and SPI thanks to its 40 pins head on a solderless board. This kit will allow you to easily build many prototypes with the Raspberry Pi!

Price €4.95

Li-ion Battery

Increase the power of your Raspberry The Li-ion HAT battery enhances the capabilities of your Raspberry with an additional 5V power supply. From a 14500 lithium battery, you can easily transport your Raspberry. This versatile module can also be used with other 5V devices.

Price €18.00

ZeroKey USB Adapter for Pi Zero

This expansion board connects to a Raspberry Pi Zero or Zero W via pogo pins to provide a full-size USB Type-A connector.You can turn a Raspberry pi zero or Raspberry pi zero W into a U drive via the P4wnP1 project (https://github.com/mame82/P4wnP1), and also use it as a BadUSB device)....

Price €8.75

Luminance and color sensor...

A really sophisticated and accurate color and luminance sensor that is compatible with Raspberry Pi and Arduino. In addition to detecting RGB color and light level, it rejects 50/60Hz light noise, has a wide detection range and two LEDs for illumination. This type of sensor is the same one you...

Price €12.91

Tracing module Raspberry Pi

Add a tracker to your Raspberry For an optimal use of your Raspberry Pi, you can install a tracking module. This infrared reflection sensor can be used for: electricity meter, paper detection in printer, barrier detection, black and white line detection..

Price €3.20

On/Off protection with IR remote...

The RemotePi card is an infrared remote control with on/off button. This card is mainly unitlised on a media center or emulator, LibreELEC, OpenELEC, OSMC, XBian, RasPlex, Raspbian, Volumio, RetroPie, Recalbox ... This infrared remote control will allow you to navigate through the menus of your...

Price €16.91

Temperature, pressure and...

A fast and accurate environmental sensor that can measure temperature, pressure and altitude. If you're looking for a simple temperature and pressure sensor, then this is the one to choose.Accurate (± 1 hPa, ± 1.0 ° C, ± 1 meter), and ideal for keeping track of temperatures around your home or...

Price €11.35
  • Out-of-Stock

POE+ Pineboards for Raspberry Pi 5

This HAT for Raspberry Pi 5 combines Power over Ethernet (PoE) with ultra-fast NVMe storage Built-in PoE+ connector and M.2 M-Key connector for simultaneous use Provides the necessary 5V/5A power to your Raspberry Pi 5 Compatible with the official SSD and MakerDisk

Price €52.80
  • Out-of-Stock

Smoke sensor, heart rate,...

You can use it as a fun way to see your heart rate or have LEDs or lights pulsate to the rhythm of your heart. It is compatible Raspberry Pi and Arduino. This sensor has three LEDs - green, red and infrared - and photodetectors that can be used together to detect the amount of light reflected...

Price €27.95
  • Out-of-Stock

Horned Sungem vision kit

Horned Sungem is one of the simplest and most versatile ways for all developers, students, AI enthusiasts and hobbyists to easily create their own AI applications. With no dependence on deep learning frameworks or complex libraries, your device will be ready to see and understand the world after...

  • Out-of-Stock

6-channel spectral sensor AS7262...

Detect six distinct channels of visible light with this spectral sensor. Unlike normal RGB color sensors, with the AS7262, you'll get six bands of color readings that roughly translate into red, orange, yellow, green, blue and violet. The two built-in white LEDs allow you to illuminate...

Price €23.40
  • Out-of-Stock

Skywriter HAT

Able to detect the position of your fingers in the air, the Skywriter HAT acts as a gesture sensor and allows you to control your Raspberry Pi with a simple finger movement! With a sensing distance of up to 5cm, you can mount your Skywriter HAT behind non-conductive material (like acrylic or...

Price €19.95
  • Out-of-Stock