Category: Accessories
PROTO SHIELD REV3
Make your projects solid with the prototyping shield. It allows you to easily design custom circuits and solder electronics directly to them.
- -30%
- -30%
USB 2.0 hub with on/off switch
USB 2.0 hub with on/off switch Transfer rate up to 480 Mbps Plug-n-Play connection - No driver installation required 2 versions available: USB to USB 7 ports and Micro-USB to USB 4 ports
- -25%
- -25%
MAX development card
KEYESTUDIO Max development board designed for prototyping and development of electronic projects Compatible with Arduino UNO R3, making it easy to use with a wide range of sensors, modules and libraries Arduino Two on-board sensors, including a microphone and a light sensor 8 x...
RJ45 / LAN CAT6 SSTP extension...
1m shielded RJ45/LAN CAT6 extension cable with SSTP certification Stable bandwidth up to 250 MHz Copper conductors and gold-plated connectors Up to 1000 MBps transfer speed
- On sale!
- -25%
- -25%
Grove female to Jumper male cable
Converts Grove connector to pin headers Compatible with Raspberry Pi and Arduino Length of each wire: 20cm Grove side uses a looped connector
Jumper Wire/Cable Kit 40 x 200 mm
40 x 200 mm Jumper Wire Kit Handy for building your networks and connecting your boards and PCBs Arranged in a single strip (4 x 10 wires of different colors) that you can separate as you wish 0.1" ferrule - Available in : Female-Female; Male-Female; Male-Male;
Grove 4-pin female conversion cable
Converts Grove connector to pin headers Compatible with Raspberry Pi and Arduino Length of each wire: 20cm Grove side uses a looped connector
Robot chassis for 2 wheel drive...
Create your own robot with this chassis and motor kit. Perfect to start developing your knowledge easily on Raspberry Pi or Arduino. You will also need a motor controller, batteries and the microcontrollers of your choice. To add your Raspberry Pi all you need is the motor controller...
Microcontroller for Arduino...
ATmega328P microcontroller compatible Arduino Designed for learning programming languages 12 built-in LEDs functioning as outputs and indicators Possibility to keep the original box as a case
- -25%
- -25%
USB 2.0 to Micro-USB cable
USB A Male - Micro B Male cable version 1M and 3M USB 2.0 compatible Micro USB cable Data transfer rate up to 60MB/s Ideal for connecting and charging your devices
- On sale!
GPIO 2x20 adapter with color code
This adapter male 2x20 pin adapter adapter is a great way to add PINs to your pINs to your Raspberry PI 0 or prototyping board. Requires soldering. The color coding is nice and simple: Red = 5V Yellow = 3V3 Black = GND Blue = DNC (I2C inverted)
Premium Jumper Wire Kit 40 X 150mm
Convenient for connecting your raspberry PI, these premium Jumper wires are 150mm long and form a set of 40 wires (4 groups of 10 rainbow colors). They have 2.54mm (0.1")" header contacts at each end and fit neatly next to each other on a standard 2.54mm (0.1") pin. They can be separated for...
Premium Jumper Wire Kit 20 X 150mm
Convenient for connecting your raspberry PI, these premium Jumper wires are 150mm long and form a set of 20 cables (2 groups of 10 rainbow colors). They have 2.54mm (0.1")" header contacts at each end and fit neatly next to each other on a standard 2.54mm (0.1") pin. They can be separated for...
USB Mini Hub with power switch
This USB HUB has four USB 2.0 ports each with a maximum total transmission speed of 480 MBps. All four ports are powered by the standard USB cable. There is also an on/off switch that controls all four USB ports. There is one port for an external power supply, but it is connected directly to the...
Power supply 12V 2A
12V 2A power supply Compatible with Arduino and Odroid (Odroid-C4, Odroid-HC2, Odroid-N2, Odroid-N2plus) 100cm cable Switching mode power adapter
Alligator clip cables for...
Set of 12 alligator clip cables. These cables are also sold in kit with the Capacitive Touch Hat Adafruit for RPi.
GPIO 2x20 adapter
This adapter male 2x20 pin adapter adapter is a great way to add PINs to your pINs to your Raspberry PI 0 or prototyping board. Requires soldering.
Official MicroSD to SD Adapter
MicroSD to SD adapter with the official Foundation logo Raspberry Pi.
Premium Jumper Wire Kit 40 X 75mm
Convenient for connecting your raspberry PI, these premium Jumper wires are 75mm long and form a set of 40 wires (4 groups of 10 rainbow colors). They have 2.54mm (0.1")" header contacts at each end and fit neatly next to each other on a standard 2.54mm (0.1") pin. They can be separated for...
OTG Micro USB to USB Adapter
At only ~15.5mm long, ~11.3mm wide and ~2mm, this adapter will probably be the smallest you've ever seen, ideal for avoiding cable clutter. A perfect and easy way to transform a device or cable with a USB-A to micro USB, ideal for use with OTG devices such as phones, tablets, mini-computers,...
USB power cable with switch
Add a power switch to any USB-powered project by simply plugging it between the USB power port and the USB cable. This cable does not transfer data - so it is generally ideal for powering and charging devices. Length: 150cm
Transparent acrylic case for...
Transparent housing for Arduino Uno Rev3 with accessible pins Material: Acrylic or molded ABS Weight: 65 g
Français
Español
Italiano
Deutsch
Portugais