Odroid-HC4 board designed for home cloud platform realization and integrated in a transparent case with heat sink and fan12nm power-efficient 1.8GHz quad-core ARM Cortex A55 processor with 4GB DDR4 RAM, integrated 16MB SPI flash chip for Petitboot functionNative and reliable PCIe to SATA direct...
ODROID cannot be powered by a micro-USB port. So you need this power supply.
Features:
AC input 100 ~ 240 Volt
DC output 5Volt / 4A
Switching mode power adapter
Compatible with EU
Note: This power supply is not compatible with ODROID-C2 / C1 + / C0 / N2 / M1.
Compatible with HC1 / MC1...
Bluetooth Gamepad controller
Compatible with Windows, Android, Apple, Nintendo Switch devices
480mAh Li-on battery, rechargeable, up to 18 hours of play for 1/2 hour charge
3 colors: GB Edition, SNES Edition or grey
Charging station for efficient charging of your controllers
LED charge indicator and overcharge protection
Storage space for your Switch game cards
With the Famicom design, find the charm of the red and white Japanese console!
1m shielded RJ45/LAN CAT6 extension cable with SSTP certification
Stable bandwidth up to 250 MHz
Copper conductors and gold-plated connectors
Up to 1000 MBps transfer speed
Official case for Odroid-N2 and Odroid-N2+ (Plus) cards
Ideal to protect the card while keeping an easy access to the different ports
Strong and resistant polycarbonate case
Available in Black or Clear
This is a 5.5-inch AMOLED display. Compared to LCD screen, it has the advantages of high contrast, wide color gamut and wide viewing angle that allow it to bring a vivid and delicate visual experience.
5.5" Amoled 1920x1080 HDMI display
Tempered glass capacitive touchscreen, 6H hardness...
Clear acrylic case for LattePanda V1 2G/32GB 4G/64GB
Ensures effective protection of internal electronic components, and lets you see the LEDs
Easy access ports, to connect your USB, HDMI, SD card, GPIO cables..
Compatible with heatsink and LattePanda fan
Increase the storage capacity of your Odroid N2 or N2+ with these 32 GB, 64 GB, 128 GB eMMC memory modules
Ready to use eMMC modules with pre-installed Linux or Android OS
Read speed higher than 150 MB/s
Sequential write speed over 125 MB/s
ODROID-N2Plus is a next-generation single-board computer that is more powerful, more stable and faster than N1.The main processor of the N2+ is based on the big.Little architecture, which integrates a quad-core ARM Cortex-A73 processor cluster and a dual-core Cortex-A53 cluster with a...
EMMC storage module without pre-installed OS
Boost your Odroid H2/H2+ or H3/H3 with 16 or 64 GB of eMMC memory
High performance, up to 250 MB/s read speed and 180 MB/s sequential write speed
EMMC interface version 5.0 or higher hS400 interface with 8-bit DDR modepCB...
Works with the integrated infrared receiver ODROID-C1 / C0 / C2
Infrared remote control
12-key function
37.9 kHz carrier frequency
NEC standard protocol
Buttons
- Power- Mute- Home- Up (Up Arrow)- Down (Down Arrow)- Left (Left Arrow)- Right (Right Arrow)- OK (Enter)- menu- Back (ESC)-...
Runlinc Wi-Fi module (NodeMCU-ESP32) with pre-installed runlinc development website
Kit of 37 sensors included
Many tutorials are provided to get you started quickly
Runlinc IDE is faster, simpler and easier to implement than other technologies such as Arduino
Nintendo NES-inspired mouse with integrated D-pad designed by 8bitDo
1000 dpi, 10m range, 100-120 hours battery life*
Windows and macOS compatible
USB 2.4 G dongle included
*Powered by 1 x AA battery (not included)
The D-Robotics RDK TM X5 PoE module is an accessory designed for the D-Robotics RDK X5 main board
It connects directly via the 40-pin GPIO header
Supports IEEE 802.3af/at standards, allowing both power and data to be transmitted through a single Ethernet cable
Equipped with an...
Black steel case for Nvidia Jetson Nano 2GB
Metal power on/off button
Ventilation cut-outs on top of the case for good ventilation
USB, HDMI and Ethernet ports easily accessible and pre-cut
The RDK Stereo Camera is a depth-sensing stereo camera module (two cameras aligned side by side) specifically designed for the RDK X5 board
It features two 2-megapixel color sensors providing synchronized video output via a dual 22-pin MIPI CSI interface
With hardware stereo...
New version (v.3) of the controller designed by 8bitDo, the game controller manufacturer known for its quality of manufacture and its meticulous finishes
A complete, retro and versatile game controller of high quality, inspired by classic video games and the colors of the SNES
The...
Storage card module with pre-installed OS
Choice of OS: Linux or Android ready to run
Boost your Odroid M1 with this 16GB eMMC memory module
High performance, sequential read and write speed is over 165MB/s and 125MB/s
This aluminum alloy case provides effective protection for your RDK X3 board
Its matte black finish and precisely cut openings around the connectors ensure easy, unobstructed use
With only four screws, installation and removal are quick and simple
Dimensions: 85 × 56 × 18.5 mm,...