Designed for automated provisioning of Raspberry Pi Compute Module 5 boards, the Programming Jig installs an operating system image and applies a security configuration directly on the board, with no Compute Module IO Board or carrier board required.
Raspberry Pi Compute Module 5 Programming Jig
€672.00
(Price Tax included)
- Dedicated programming for OEM production: automatically loads OS images onto the eMMC of one Compute Module 5 at a time, using a pogo pin connection with no carrier board
- Mechanical reliability: a secure clamp holds the module in place throughout programming, with LEDs showing the jig’s status and provisioning progress in real time
- Dual network for performance: an Ethernet or Wi-Fi port connects the jig to the provisioning network, while a second, dedicated Ethernet port speeds up data transfer to the module being programmed
- Security and software flexibility: supports secure boot, full-disk encryption, and OS installation
Compute Module 5 Programming and Provisioning Station
The Raspberry Pi Compute Module 5 Programming Jig is a professional provisioning station designed to program Raspberry Pi Compute Module 5 boards quickly and securely.
Thanks to its pogo pin interface, the station connects directly to the Compute Module 5, with no expansion board or carrier board required. Its clamping mechanism holds the module firmly in place throughout programming.
Automated and secure provisioning
The Programming Jig works with the open-source rpi-sb-provisioner software to automate the main steps of preparing a Compute Module 5:
- installing an operating system image;
- configuring secure boot (Secure Boot);
- setting up full-disk storage encryption;
- creating encryption keys when the selected security mode requires it;
- in Secure Boot mode, permanently programming the signing key hash into the Compute Module 5’s OTP memory.
Once the Compute Module 5 is correctly installed and the lid is closed, the provisioning process starts automatically.
Key features
- Direct connection to the Compute Module 5 via pogo pins
- One programming slot, processing one module at a time
- Secure clamping mechanism holds the module in position
- Fully automated provisioning
- Supports Secure Boot and full-disk encryption
- LED indicators showing the status of the jig, the module, and programming
- Network connection via Gigabit Ethernet or Wi-Fi
- Dedicated Ethernet port for the module to speed up data transfer
- No Compute Module IO Board required
Fast programming
In a suitable setup, provisioning a 2.6 GB system image takes about 1 minute 30 seconds per module in “naked” mode, meaning an OS installation without Secure Boot or full-disk encryption.
Actual times depend on image size, storage type, and network performance.
Status indicators
Three LEDs on the top make it easy to monitor the equipment:
- JIG: shows the status of the programming station;
- DUT: shows the status of the connected Compute Module 5;
- STATUS: shows provisioning progress.
The STATUS LED turns orange during module detection and preparation, red during installation and configuration, then green when provisioning is complete.
Connectors
- Power input: 12 V DC, 2 A, 24 W (power supply included)
- USB Boot: USB-C, used for programming the station’s system
- JIG ETH: Ethernet port for managing, configuring, and updating the station
- DUT ETH: Ethernet port dedicated to the Compute Module 5 being programmed
- Dual-band Wi-Fi: wireless connection to the provisioning network
Specifications
- Compatibility: Raspberry Pi Compute Module 5
- Modules programmed simultaneously: 1
- Module interface: Pogo pin contacts
- Station network: Ethernet 10/100/1000 or Wi-Fi 2.4/5 GHz
- Wi-Fi standards: IEEE 802.11 b/g/n/ac
- Module network: Ethernet 10/100/1000
- USB Boot interface: USB-C
- Power: 12 V DC, 2 A, 24 W
- Dimensions: 170 × 181.5 × 153 mm (6.69 × 7.15 × 6.02 in)
- Weight: 1,796 g (3.96 lb)
Applications
This station is especially well suited to:
- production lines using the Compute Module 5;
- embedded solution integrators;
- validation and test labs;
- manufacturers who need to prepare batches of identical modules;
- deployments that require a repeatable security configuration;
- pre-installation and configuration before integration.
Safety Precautions
- Never close and lock the lid without a Compute Module 5 correctly seated in its slot, or the pogo pins may be damaged.
- Before closing the mechanism, check that the four holes of the Compute Module 5 are properly engaged on the locating pins and that the Raspberry Pi logo on the module faces the same direction as the one on the jig.
- Do not touch the metal pogo pin contacts: they are sharp and may be live.
- Do not remove the Compute Module 5 during the bootstrap, preparation, or provisioning phases. Wait for the STATUS LED to turn green before removing the module.
- Do not press the unmarked button on the jig by hand. It is a safety switch used by the provisioning software, and pressing it manually may interrupt the operation.
- Unplug the Programming Jig from its power supply before any maintenance.
SC2357
2 Items
You might also like
Comments (0)
No customer reviews for the moment.
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Français
Español
Italiano
Deutsch
Portugais