- New
Home Assistant Connect AUX-2
The Swiss Army knife for your smart home!
Connect AUX-2 links to your Home Assistant setup and combines three essential features:
-
High-fidelity audio: connect your Hi-Fi system, home theater, or AV receiver to Home Assistant and stream lossless audio, perfectly synchronized with your smart speakers
-
Extended device control: manage your audio gear as well as more technical equipment (TVs, solar setups, inverters) right from Home Assistant using its dual RS-232 serial ports
- Extend Bluetooth coverage: thanks to the built-in Bluetooth 5 LE proxy and dedicated antenna, enabling up to 3 simultaneous connections with your compatible smart home devices
-
Compatible with Home Assistant Connect ZWA-2
Specifications
Product details
-
SoC: ESP32-S3R8 (8 MB PSRAM, 8 MB flash memory)
-
Audio DAC: TI PCM5122, 112 dB signal-to-noise ratio
-
Ethernet controller: W5500
-
Power supply: USB-C, 5 V DC, 2 A, or Power over Ethernet (802.3af or higher)
-
Typical power consumption: less than 1 W
Audio
-
Output: 3.5 mm analog or optical (S/PDIF), output only
-
Analog audio: 16-bit / 48 kHz stereo
-
Digital audio: 16-bit / 48 kHz stereo PCM, lossless
-
Codecs: FLAC, MP3, WAV
-
Multiroom audio: synchronized via Music Assistant (Sendspin)
-
Only one audio output can be used at a time
Serial & USB
-
Serial ports: 2 × 3.5 mm RS-232 (±5 V), TX/RX toggle switch
-
USB-A: Connect ZWA-2 or Waveshare USB to RS-485 adapter (sold separately)
Connectivity
-
Wi-Fi: 2.4 GHz, 802.11b/g/n
-
Bluetooth: Bluetooth 5 LE, proxy for up to 3 active connections
-
Ethernet: Power over Ethernet (802.3af or higher)
- Power supply (not included): via USB-C (5 V, 2 A) or Power over Ethernet (802.3af or higher)
Software
-
Platform: designed for Home Assistant, powered by ESPHome
-
Bootloader: unlocked, accepts custom firmwares
Dimensions & Compliance
-
Dimensions & weight: 106 x 63 x 25 mm, 104 g
-
In the box: 110 x 72 x 28 mm, 136 g
-
Enclosure material: polycarbonate plastic
-
Color: white and semi-transparent
-
Operating conditions: indoor use only, 0 °C to 65 °C (32 °F to 149 °F)
-
Humidity: non-condensing
-
Store in a dry, low-dust environment to prevent damage to the device
-
Do not expose the device to direct sunlight or place it near a heat source to avoid overheating
-
Compliance: CE, FCC, RCM
Useful documentation
What's in the box
-
Home Assistant Connect AUX-2
-
Safety and warranty information notice
-
Home Assistant sticker
Compatible with Home Assistant Connect ZWA-2. Audio, serial, USB-C, and Ethernet cables are not included.
You might also like
Questions (0)
No customer questions for the moment.
Français
Español
Italiano
Deutsch
Portugais