Maqueen Plus V3 - Advanced STEM robot with laser matrix navigation for competitions (AA batteries)
The Maqueen Plus V3 is an educational robot focused on movement in its environment. It incorporates features such as line following, intersection recognition, obstacle avoidance and precise navigation. Ideal for teachers, students and robotics enthusiasts, this robot offers a versatile platform for learning and experimenting.
- Precise, responsive navigation thanks to its detection algorithms, matrix laser rangefinder and high-precision motor encoders.
- Customizable and versatile via GPIO pins that allow the addition of extensions, and programmable RGB LEDs to give free rein to your creativity
- Two removable, reinforced metal motors ensure smooth rotation and easy maintenance, and stand up to intensive use
- Available in 2 models, battery-operated or battery-powered, to suit your needs.
It is micro:bit compatible and uses the Makecode environment, designed to facilitate learning. The micro:bit card required to operate the robot is not included in this kit, but is available here
Getting started is simplified by online documentation and examples: Beginner's Guide, Makecode documentation, Maqueen V3 documentation
Compatibility
- Micro:bit card: Compatible with standard side connectors.
- Programming environments: Support for visual languages (MakeCode) and text languages (Python, JavaScript).
Features
SENSORS
-
Line tracking system
-
Number of sensors: 5
-
Calibration: Dedicated button
-
Output: Digital / Analog
-
Integrated intersection recognition: 4 types (Crossroads, T, Right turn & straight ahead, Left turn & straight ahead)
-
Algorithm speed: 5 adjustable levels
-
-
Laser range-finding matrix sensor
-
Interface: I2C / UART / USB (PH2.0-4P & TYPE-C)
-
Matrix resolution: 8x8 (64 points)
-
Modes: Matrix measurement / Intelligent obstacle avoidance
-
I2C address: 4 selectable (0x30 - 0x33)
-
Update frequency: 15Hz - 60Hz
-
Measurement range: 20mm - 4000mm
-
Accuracy (20-200mm): ±11mm (white targets), ±12mm (grey targets)
-
Accuracy (200-4000mm): ±5% (white targets), ±6% (grey targets)
-
Detection angle: 60° H x 60° V (90° diagonal)
-
Laser safety: Class 1
-
Firmware update: Supported via USB
-
-
Light sensors
-
Number of sensors: 2
-
Data range: 0 - 1023
-
-
Light and sound transmitters
-
Number of transmitters: 4
-
Addressability and colors: WS2812 (full spectrum R255 G255 B255)
-
Lights: 2x programmable RGB (Red, Green, Yellow, Blue, Violet, Cyan, White)
-
Buzzer: 1
-
-
Infrared receiver: 1
MOTORS AND MOTION CONTROL
- N20 metalmotors
- Number of motors: 2
- Interface: PH2.0 - 2P
- Power supply: 5V independently regulated
- Mounting : Screws, removable
- Encoders and PID control
- Encoders: 2 (Magnetic induction, 4-line resolution)
- PID controller
- Speed measurement unit: Centimeters per minute
MOUNTING AND EXTENSION
- Mounting
-
Metal frames: 2
-
Bracket adjustment: 1 axis, 270° range (M3 thumb screw)
-
PCB threaded interfaces: 2
- Extension: 14x extended GPIOs
- Protection: Acrylic protection plate
- Firmware update: Dedicated interface and button
POWER SUPPLY
Depending on version selected:
-
AA battery version: 3.5V - 6V (requires 4 AA batteries - 1.5V dry cell or 1.2V Ni-MH rechargeable batteries)
-
Battery version: 3.5V - 4.2V (lithium battery)
-
Reverse polarity protection
Contents
-
-
x1 Maqueen Plus V3 base board
-
x2 Metal motor with encoder and connection cable (already installed on base board)
-
x1 AA power supply card
-
x1 Matrix laser telemetry sensor
-
x1 PH2.0 - 4P sensor connection cable
-
x2 Wheels
-
x1 Line tracking card
-
x1 Screwdriver
-
x1 Metal support frame
-
x1 Metal mounting bracket
-
x5 35mm copper mounting pillars
-
x5 M3 mounting screws
-
x4 M3 thumb screws
-
Reminder: The micro:bit card is not included in this kit
You might also like
Questions (0)
No customer questions for the moment.
Français
Español
Italiano
Deutsch
Portugais