Real time clock with battery to keep time even when your project is off or while you reprogram your microcontroller.
The breakout is perfect for time dependent projects, timers, alarms, etc. The DS1307 is the most popular RTC, and works perfectly with 5V microcontrollers such asArduino.
This...
The 3-degree accelerometer sensor measures acceleration on 3 axes. If you need simple and reliable motion detection for your project, then this is a great choice!
It also has some clever features built in. It has interrupts for motion in each axis, double tap detection and free fall detection....
Connect your own PCB to a Raspberry Pi with this full-size female header. The female part of the header is about 8.5mm high, which is handy for small HATs that don't clean USB/Ethernet sockets. This header has 3mm pins, compared to our stackable version which is the same basic height, but has...
Motor driver card ideal for mobile robots
Équiped with 4 LED lights and 4 test buttons
Regenerative braking provides better control of motor speed
Compatibility with Arduino and Raspberry Pi and micro:bit controllers
It is a 2-channel RS232 expansion HAT designed for Raspberry Pi which adopts SC16IS752 + SP3232 solution, with built-in protection circuits such as power supply isolation, ADI magnetic isolation and TVS diode, etc.It is easy to control the 2-channel RS232 via SPI interface. With fast...
7x17 LED array (119 white LEDs) with individual brightness control of each LED
Compatible with Raspberry Pi Pico and programmable in C / C ++ and MicroPython
4 x programmable touch buttons and IS31FL3731 LED array driver chip
Fully assembled, pre-soldered female sockets for attachment to the...
Drive two DC motors simultaneously
Specially designed for Raspberry Pi, this Motor Driver HAT allows you to drive two DC motors at the same time. Controlled via an I2C interface, this accessory is ideal for your intelligent mobile robots.
DC motor size 130
Suitable for automation/robotic projects
Wider operating range than most DC motors: 4.5 to 9VDC
Controllable with a Motor Shield or a Arduino
Composed of 2 rows of 20 Pin is 40 PIN in total.
This GPIO cable is 150 mm long.
It allows you to connect your new Rapberry Pi B+
Ideal for programming, dialoguing with a breadboard, sending and receiving data.
Not compatible with Model B and A
Capture the world around you with enviro:bit! It has sensors for air and weather, color and light, and sound, and connects directly to your micro: bit.
Just place your micro: bit, then code enviro:bit with the block-based Microsoft MakeCode editor, or with MicroPython in the Mu code editor. The...
Add a tracker to your Raspberry
For an optimal use of your Raspberry Pi, you can install a tracking module. This infrared reflection sensor can be used for: electricity meter, paper detection in printer, barrier detection, black and white line detection..
Set of two boxes with transparent lids, ideal for storing components and other parts.
The great thing about these boxes is that they also fit together, in the configuration of your choice. You can mix and match all sizes to create the ideal box for your needs, and add more components if...
GSR (Galvanic Skin Response) sensor to reflect your emotions simply by placing two electrodes next to each other
Ideal for monitoring sleep quality, lie detector, etc.
Adjust sensitivity via potentiometer
Easy-to-read analog voltage output
This adapter male 2x20 pin adapter adapter is a great way to add PINs to your pINs to your Raspberry PI 0 or prototyping board. Requires soldering.
The color coding is nice and simple:
Red = 5V
Yellow = 3V3
Black = GND
Blue = DNC (I2C inverted)
CompatibleArduino UNO R3,
Designed for school education, ideal for STEM projects,
Simplified coding and electronics with built-in LEDs,
Develops problem solving and stimulates creativity.
Maker HAT compatible with wide range Raspberry Pi
Fits perfectly with the Raspberry Pi Zero WH
Useful LED indicators for troubleshooting and testing
Suitable for learning programming and electronics.
Enter your secret key into this digital matrix keyboard. This 16-button keypad, arranged in a 4x4 telephone line grid, is made of a thin, flexible membrane flexible membrane with an adhesive backing so you can attach it to any surface.
The latest addition to the "Strompi family" offers completely new application possibilities for Raspberry Pi and many other development boards.In addition to the voltage inputs already available, the new StromPi 3 is now equipped with an optional plug-in battery unit to equip your Raspberry Pi...
Detect light, objects and follow lines with the clip-on sensor card for the BBC bit microphone. Attach directly to Micro:bit or connect with alligator cables.
This joystick module may be the best choice for a DIY gaming project. It has two analog input pins to control the X-axis and Y-axis and also has a button input, which can be thought of as the Z-axis, but only in digital signal.
Two analog pins (X, Y), one digital pin (button)
Input voltage: 5V...
This button can conveniently function as a standard input button on a PCB or breadboard.
Maximum dimensions: 18mm x 18mm x 29mmButton height: 5mmButton height when pressed: 3.5mm