GPIO 2x20 adapter
This adapter male 2x20 pin adapter adapter is a great way to add PINs to your pINs to your Raspberry PI 0 or prototyping board. Requires soldering.
This adapter male 2x20 pin adapter adapter is a great way to add PINs to your pINs to your Raspberry PI 0 or prototyping board. Requires soldering.
Designed for Raspberry Pi Pico, ideal for robotic projects Allows Raspberry Pi Pico to drive 4 motors simultaneously or 2 stepper motors 27 I/O pins available to add other devices such as sensors, LEDs, etc. Equippedwith an on/off switch and a power status LED
To set up a lighting system in your different projects, choose this LED switch! Dimensions: 30x25x28mm 16A 250V 20A 125V
GPIO expansion card to connect up to 2 additional expansion modules Designed specifically for the Raspberry Pi Pico Standard socket for mounting the Raspberry Pi Pico (via solder or jumper wire) Clear and easy to use pinout labels
Extension with multiple sensors (temperature, humidity, magnetometer…), a 64x64 LED matrix, and a mini joystick. Designed for measurements, experiments and Python programming Easily connects to the Raspberry Pi via the 40 GPIO pins Compatible with the Raspberry Pi 5, as well as...
The RemotePi card is an infrared remote control with on/off button. This card is mainly unitlised on a media center or emulator, LibreELEC, OpenELEC, OSMC, XBian, RasPlex, Raspbian, Volumio, RetroPie, Recalbox ... This infrared remote control will allow you to navigate through the menus of your...
These small boxes with clear lids are ideal for storing your small parts. The beauty of these boxes is that they also fit together in any configuration you choose. You can mix and match all sizes to create the perfect box for your needs and add more components if needed. Size: 126 x 64 x 22mm
These small boxes with clear lids are ideal for storing your small parts. The beauty of these boxes is that they also fit together in any configuration you choose. You can mix and match all sizes to create the perfect box for your needs and add more components if needed. Size: 25 x 32 x 22mm...
These small boxes with clear lids are ideal for storing your small parts. The beauty of these boxes is that they also fit together in any configuration you choose. You can mix and match all sizes to create the perfect box for your needs and add more components if needed. Size: 76 x 32 x 22mm...
The MCP3008 is a 10-bit successive approximation analog-to-digital converter with an integrated sample-and-hold circuit. It is programmable to provide four pairs of pseudo-differential inputs or eight single-ended inputs. ........
Ideal for motor drives, this prototyping board features analog sensors and an interface to 5V systems.
Enter your secret key into this digital matrix keyboard. This 12-button keypad, arranged in a 3x4 telephone line grid, is made of a thin, flexible membrane with an adhesive backing so you can flexible membrane with an adhesive backing so you can attach it to any surface.
LOT OF 4 LED - 2 infrared emitters 5mm and 2 receiver diodes Size: 5MM
Increase the capabilities of your Raspberry Pi The original Raspberry Pi has only one UART port with 1 channel. With this serial extension, you have a UART with two channels as well as 8 GPIOs programmable via I2C. The LEDs integrated in the extension allow you to monitor the UART operating status.
Module composed of 8 programmable RGB lights Compatible Arduino, Micro:bit and Raspberry Pi Pico 3 possible connection methods: alligator clip, Dupont cable and PH 2.0 cable High brightness (256 brightness levels) - ideal for creating lighting effects
Have a fun and creative learning experience with LEGO® and Raspberry Pi Raspberry Pi Build HAT add-on board with a Raspberry Pi RP2040 microcontroller designed in collaboration with LEGO® Education and compatible with all LEGO® models Raspberry Pi Control up to 4 LEGO® extensions such as...
DC motor ideal for robotics, model making, ... Reduction ratio: 1/48, 1/120, 1/180, 1/220, 1/256, 1/288, Load current: 0.1-0.35A
These are our favorite mini potentiometers, perfect for breadboarding and prototyping. They have a long grippy knob and with 0.1" spacing they plug into breadboards or perfboards with ease. TECHNICAL DETAILS Body size: 9.5mm x 9.5mm x 4.9mmRotation: 270 degrees
Discover your HDMI Mini Decoder card! So small and so simple, you can use this card as an all-in-one driver for TTL displays, or to decode HDMI / DVI video. This is the contact version! So you can combine it with to a resistive touchscreen! This driver is specifically designed for compact...
Able to detect the position of your fingers in the air, the Skywriter HAT acts as a gesture sensor and allows you to control your Raspberry Pi with a simple finger movement! With a sensing distance of up to 5cm, you can mount your Skywriter HAT behind non-conductive material (like acrylic or...
A very attractive strip light The new DotStar light strip has an outstanding performance and offers a very aesthetic white light rendering. Thanks to the use of generic SPI wires, data transmission is much faster and does not require any special synchronization. These flexible strips are 1 meter...