HDMI 2.0 4K cable
Black HDMI male to HDMI male 2.0 High speed cable Ideal for wiring your LED/OLED/QLED 4K HDR Ethernet TV Available in 2 lengths: 3M, 5M
Black HDMI male to HDMI male 2.0 High speed cable Ideal for wiring your LED/OLED/QLED 4K HDR Ethernet TV Available in 2 lengths: 3M, 5M
only one module can drive an 8x8 dot common cathode array Operating voltage: 5V Module size: 12.8 x 3.2 x 1.3 cm (l * w * h) with 64 screw mounting holes, hole diameter: 3mm module with input and output interfaces, support multiple modules in cascade
15.6" and 18.5 "Full HD (1920×1080) displays with capacitive multi-touch (up to 5 points) Direct connection to your PC or Raspberry Pi via HDMI input port Dust- and water-resistant IP65 front panel, reinforced aluminum chassis for excellent mechanical rigidity VESA or...
Sharpness, high resolution, wide viewing angles (IPS), this 1.3 " square color LCD screen, 240x240 pixels, will add spice to your projects Raspberry Pi or Arduino. A very sharp and bright screen thanks to its wide viewing angles and protected against polarity inversion.
HyperPixel 2.1 Round with a crisp, bright IPS display, touch screen and high-speed DPI interface Compatible with any Raspberry with a 40-pin header ideal for custom interfaces and control panels Designed to mount a Raspberry Pi Zero on the back without it showing Pre-welded, ready-to-use...
White or black Micro-HDMI to HDMI (type A) cable (1 meter) for Raspberry Pi 4.
Cooling fan size 310 with 4 screws and nuts. Dimensions: 30x30mm Not compatible with the Raspberry Pi 5
This is a 5.5-inch AMOLED display. Compared to LCD screen, it has the advantages of high contrast, wide color gamut and wide viewing angle that allow it to bring a vivid and delicate visual experience. 5.5" Amoled 1920x1080 HDMI display Tempered glass capacitive touchscreen, 6H hardness...
This heatsink is made from high quality aluminum and works perfectly with Raspberry Pi cards but is optimized for the Pi 3 model to correct possible overheating problems.
Mini HDMI Type C Male to HDMI Male Cable 1m or 2m HDMI (High Definition Multimedia Interface) is a specification that combines video and audio into a single digital interface for use with DVD players, digital television (DTV) players, set-top boxes, and other audiovisual devices.
The Nokia 5110 is a basic graphical LCD display for many applications. It uses the PCD8544 controller, which is the same used in the Nokia 3310 LCD. All the functions needed for the display are provided in a single chip, including the on-chip generation of the LCD, power supply and bias voltages,...
Looking for the best heat sink for your Raspberry Pi 3? Discover this beautiful and large Heat Sink of dimensions 15x15x15mm!
Black HDMI male to HDMI male cable Suitable for Raspberry Pi 3 and earlier versions Available in 6 lengths: 0.5M, 1M, 2M, 3M, 5M, 10M
The Arduino MKR RGB Shield puts 84 LEDs (12x7) at your service! Write messages and add graphics with this shield Very dense and bright LEDs with full RGB colors No need for soldering or adapters, just plug the RGB Shield into your favorite MKR board
A bright and clear 1.12" OLED display ideal for adding a small screen to your project. This 128 x 128 pixel white/black monochrome display is ideal for graphing, reading and displaying basic icons. OLEDs have the advantage of being extremely bright and readable, with great contrast. Because this...
A handy little LCD screen for adding readouts to your projects. This 0.96" SPI LCD has a 2:1 aspect ratio, wide viewing angles (IPS) and works with Raspberry Pi or Arduino. It is bright, has excellent resolution and you will be able to display small information such as timers, clocks, sensor...
A bright and clear 1.12" OLED display ideal for adding a small screen to your project. This 128 x 128 pixel white/black monochrome display is ideal for graphing, reading and displaying basic icons. OLEDs have the advantage of being extremely bright and readable, with great contrast. Because...
Add some color to your next coding project with our new Halo board for the BBC Micro: bit. The Halo features 24 customizable color addressable ZIP LEDs.
This super cute 5x5 RGB LED matrix board is a great way to visualize sensor data or for simple animations or notifications, and is compatible with Raspberry Pi and Arduino. These small arrays are great for viewing data from other boards in a Breakout Garden HAT, such as the environmental data...
ACCESS: bit is a bolt-on/clip-on card for the BBC microbit that simulates an access gate. It includes a switch to turn on and off the built-in 3xAAA battery power, as well as an audible horn. The ACCESS: bit joins the micro: bit family of transport / crosswalk accessories, which also includes;...
Official Raspberry HDMI to HDMI cable Perfectly suited for Raspberry Pi 3 and previous models 1m long cable Available in 2 colors: White or Black
E-paper module with 2.9" SPI interface in 3 colors (red, black, white) Ideal for price tags, shelf labels, industrial instruments Low power, wide viewing angle, paper-like display without electricity Compatible with Raspberry Pi, Jetson Nano, Arduino, STM32, etc.