This Pi Zero USB adapter converts the Zero's Micro USB B port into a full-size USB A port so you can plug in your mouse, keyboard, or any other required device! It's an OTG (on-the-go) host cable, which means your Zero can act as a host (master) or client device.
Features:
Micro USB B (male)...
FT232RL USB-C to UART (TTL) communication board
Compatible with Mac OS, Linux, Android, WinCE, Windows 7/8/8.1/10/11...
3 power supply modes 5 V output, 3.3 V output or powered by the target board (3.3 V-5 V)
Dimensions: 46 x 19 mm
Wideband (100 MHz to 4 GHz) Low Noise Amplifier Modules (LNA) based on SAW bandpass filter
Designed to pass between a software defined radio receiver and an antenna and reduce out-of-band intermodulation while providing additional gain for increased sensitivity
Compatible with most...
Do-it-yourself arcade kit with LED push buttons with light effects
Easy assembly with zero delay interface board
Compatible with Raspberry Pi 4, 3B and 3B+
Works with MAME emulator
Bluetooth Gamepad controller
Compatible with Windows, Android, Apple, Nintendo Switch devices
480mAh Li-on battery, rechargeable, up to 18 hours of play for 1/2 hour charge
3 colors: GB Edition, SNES Edition or grey
Compatible with Raspberry Pi A, B, A+, B+, Zero, 2, 3 with its L80-39 GPS chipCommunicates satellite data via UART or USBCP2102 as a stable and faster UART chip USB bridge66 simultaneous search channels and 22 tracking channelsAdvanced AGPS EASY™ technology without external memory
USB cable not...
Ultimate mobile game controller supported by Apple and Android 13
Compatible with most smartphones thanks to its extendable adjustment system
Robust Hall-effect joysticks and triggers for superior precision and durability
Customizable profiles via 8BitDo Ultimate V2 software...
8-button remote control for your connected devices
Easily adjust fan speed, brightness and more
Elegant design with easy wall mounting with screws or glue
Easy pairing with a simple push of a button
The ideal kit to build your own retro arcade console and controller
Ball joystick + 10 LED backlit buttons
Easily configurable on different emulation systems (RetroPie, Recalbox, ...)
Compatible Raspberry Pi
The SIM7020E is a NarrowBand-Internet of Things (NB-IoT) module specifically designed for the Raspberry Pi Pico and is ideal for IoT applications
Supports multiple NB-IoT frequency bands, UART communication, serial AT command control, support for multiple communication protocols, support...
It is a low power HAT Raspberry Pi, equipped with multiple communication features: GSM, GPRS, GNSS and Bluetooth.
It allows your Pi to easily make a phone call, send messages, connect to the Internet wirelessly, global position, transfer data via Bluetooth, and so on. GPS antenna not included.
USB 2.0 hub with on/off switch
Transfer rate up to 480 Mbps
Plug-n-Play connection - No driver installation required
2 versions available: USB to USB 7 ports and Micro-USB to USB 4 ports
1m shielded RJ45/LAN CAT6 extension cable with SSTP certification
Stable bandwidth up to 250 MHz
Copper conductors and gold-plated connectors
Up to 1000 MBps transfer speed
Carrier IoT Rev2 expansion board compatible with all Arduino MKR microcontrollers
Équiped with temperature, humidity, pressure and motion sensors thanks to the 6-axis IMU module and light, gesture and proximity sensors
Expansion board that offers endless possibilities for IoT projects...
Breakout board with uBLOX MAX-M8C-1 module with additional power filtering, chip antenna and decoupling capacitor
Light weight of only 1.5g
Suitable for HAB use with maximum altitude of 50000 meters in flight mode
VCC, GND and RX & TX, SCL & SDA for I2C
Expansion board compatible with the ESP32 Core keyestudio card
Designed to expose all keyestudio ESP32 Core board pins as a 2.54mm pin header
Embedded DIP switch for power control
Powered via DC 7-12V socket
USB A Male - Micro B Male cable version 1M and 3M
USB 2.0 compatible Micro USB cable
Data transfer rate up to 60MB/s
Ideal for connecting and charging your devices
GPIO expansion card to double the number of available GPIO ports
Designed specifically for the Raspberry Pi Pico
Labeled female headers for attaching to your Pico, connection ports with labeled male headers
99% assembled - just glue the 4 rubber feet, no soldering required (as...
ELEGOO R3 development board compatible with Arduino UNO REV3
Compatible with Arduino IDE projects
Embeds the new version of the ATMEGA328P chip for control (identical to Arduino UNO R3)
Easy development thanks to the naming of the female connectors: easier wiring ensured
With this miniature wifi module, free your Internet projects from network cables by adding a wifi module!
Your Raspberry is equipped with a USB port, so you can have a reliable wireless Internet connection at an affordable price.
You will have a wireless Internet connection in 10 minutes!...
This retro game kit is suitable for makers and anyone who wants to make a retro game at home.
It is easy to assemble and you can connect it to your PC, laptop and even Raspberry Pi using the RetroPie or Recalbox operating system.
Works with the integrated infrared receiver ODROID-C1 / C0 / C2
Infrared remote control
12-key function
37.9 kHz carrier frequency
NEC standard protocol
Buttons
- Power- Mute- Home- Up (Up Arrow)- Down (Down Arrow)- Left (Left Arrow)- Right (Right Arrow)- OK (Enter)- menu- Back (ESC)-...