SNES USB Controller
USB controller with the same design as the SNES controller Ideal for playing your favorite retro Super Nintendo games Plug-n-play connection and compatible with most emulators Available in 2 colors: Grey or Black
USB controller with the same design as the SNES controller Ideal for playing your favorite retro Super Nintendo games Plug-n-play connection and compatible with most emulators Available in 2 colors: Grey or Black
Features: USB interface, plug and play Suitable for games: arcade, fighting, live soccer, etc...
New version (v.3) of the controller designed by 8bitDo, the game controller manufacturer known for its quality of manufacture and its meticulous finishes A complete, retro and versatile game controller of high quality, inspired by classic video games and the colors of the SNES The...
Connect up to 6 breakout modules (4 x I2C and 2 x SPI) to your Raspberry Pi Pico Numbered board connection ports and M.2.5 mounting holes to secure the board Reverse polarity protection Compatible with most Breakout modules Pimoroni
7 types of lighting effects possible. Two buttons to illuminate the mouse or wheel light. Comfortable touch, good hand feel, 1600 DPI (800/1200/1600, 3-level DPI adjustment), Meet your multiple needs, whether for daily work or for gaming. 5 buttons for superior productivity and efficiency,...
Nintendo NES-inspired mouse with integrated D-pad designed by 8bitDo 1000 dpi, 10m range, 100-120 hours battery life* Windows and macOS compatible USB 2.4 G dongle included *Powered by 1 x AA battery (not included)
Connect your own PCB to a Raspberry Pi B+ with this (extra high) female head which allows you to gain 16,5mm of height: When you place a PCB on your Raspberry Pi it lights up the Ethernet and USB sockets.
It is a 2-channel RS232 expansion HAT designed for Raspberry Pi which adopts SC16IS752 + SP3232 solution, with built-in protection circuits such as power supply isolation, ADI magnetic isolation and TVS diode, etc.It is easy to control the 2-channel RS232 via SPI interface. With fast...
Composed of 2 rows of 20 Pin is 40 PIN in total. This GPIO cable is 150 mm long. It allows you to connect your new Rapberry Pi B+ Ideal for programming, dialoguing with a breadboard, sending and receiving data. Not compatible with Model B and A
Industrial-grade LoRa gateway, LoRaWAN compatible, specially designed for demanding indoor professional IoT applications High power transmission, 8 LoRa channels and multiple interfaces make it ideal for multistory buildings, parking lots and factories Compatible with MKR WAN...
Controller inspired by the PC Engine and designed by 8bitDo USB 2.4 G dongle included Compatible PC Engine mini, CoreGrafx mini & TurboGrafx-16 mini, Nintendo Switch Available in 3 colors: PC Engine, CoreGrafx and TurboGrafx-16
Connect your own PCB to a Raspberry Pi with this full-size female header. The female part of the header is about 8.5mm high, which is handy for small HATs that don't clean USB/Ethernet sockets. This header has 3mm pins, compared to our stackable version which is the same basic height, but has...
Are you developing a complex IoT device with your MKR board and running out of memory? Add Flash memory and microSD storage to your MKR card and enable over-the-air updates with the Arduino MKR MEM shield.
Maker HAT compatible with wide range Raspberry Pi Fits perfectly with the Raspberry Pi Zero WH Useful LED indicators for troubleshooting and testing Suitable for learning programming and electronics.
This adapter male 2x20 pin adapter adapter is a great way to add PINs to your pINs to your Raspberry PI 0 or prototyping board. Requires soldering. The color coding is nice and simple: Red = 5V Yellow = 3V3 Black = GND Blue = DNC (I2C inverted)
The Micro: bit Breadboard adapter is compatible with BBC Micro: bit.
The D-Robotics RDK TM X5 PoE module is an accessory designed for the D-Robotics RDK X5 main board It connects directly via the 40-pin GPIO header Supports IEEE 802.3af/at standards, allowing both power and data to be transmitted through a single Ethernet cable Equipped with an...
This USB HUB has four USB 2.0 ports each with a maximum total transmission speed of 480 MBps. All four ports are powered by the standard USB cable. There is also an on/off switch that controls all four USB ports. There is one port for an external power supply, but it is connected directly to the...
Ideal expansion board to speed up your prototypes with advanced connectivity and development options Compatible with Portenta C33, H7 and X8 modules for scalable projects Easily add Ethernet ports, mini-PCIe, CAN lines, USB and MIPI cameras Designed for advanced and industrial...
This ADS1015 ADC (analog-to-digital converter) package has three channels that can read voltages from -24 V to +24 V at sampling rates up to 3.3 KHz with 12-bit resolution. It is compatible with Raspberry Pi and Arduino and is ideal for measuring voltages quickly and accurately over a wide...
At only ~15.5mm long, ~11.3mm wide and ~2mm, this adapter will probably be the smallest you've ever seen, ideal for avoiding cable clutter. A perfect and easy way to transform a device or cable with a USB-A to micro USB, ideal for use with OTG devices such as phones, tablets, mini-computers,...
Take care of all your projects USB to RS 232 TTL adapter is a simple and fast solution to take care of all your realizations via a USB key. In order to adapt to all, this USB converter is available for Linux, Windows and WinCe.
This expansion board connects to a Raspberry Pi Zero or Zero W via pogo pins to provide a full-size USB Type-A connector.You can turn a Raspberry pi zero or Raspberry pi zero W into a U drive via the P4wnP1 project (https://github.com/mame82/P4wnP1), and also use it as a BadUSB device)....