PCM5100A Stereo DAC with PAM8908JER stereo headphone amp
I2S expansion board for Raspberry Pi Pico and programmable in C and C+ only
3.5mm stereo headphone jack + 3.5mm stereo line out, gain control switch
Fully assembled, pre-soldered female sockets for attachment to the Pico and no soldering...
This night vision camera Raspberry Pi has a 160° wide fisheye lens and uses the same OV5647 chip as the standard Raspberry Pi camera! It is therefore capable of producing a crystal clear 5MP image or a 1080p HD video recording at 30 frames per second!
Bluetooth LE development board designed for IoT and AI applications
Rich interface: 1x reset button, 1x UART, 1x IIC, 1x SPI, 1x NFC, 1x SWD, 11x GPIO, 6x ADC, 1x three-in-one LED, 1x user LED
Embedded microphone, embedded antenna and 6 Dof IMU
Can be programmed with Arduino,...
This new version of HAT was designed by Raspberry Pi to replace PoE HAT
Meets IEEE 802.3af (802.3at Type 1) specifications
37-57 V DC input voltage, Class 4 device to power your Raspberry Pi using Power over Ethernet compatible networks
Controllable fan included with the HAT and...
The high quality camera Raspberry Pi offers a resolution of 12 megapixels and a greater sensitivity especially in low light. It is designed to work with interchangeable lenses with C and CS mounts. Other lenses can be adapted using third-party lens adapters.
The HQ camera is suitable for...
This tripod is compatible with the Raspberry HQ camera and many other supports such as a smartphone.Its 360° rotation will allow you to take the shots you want from any angle.
CAN RS485 isolated extension HAT
1 CAN channel : MCP2515 controller with CAN transceiver
2 RS485 channels: SC16IS752 and SP3485 dual chip combination
Standard 40PIN GPIO header Raspberry Pi
2 channel UART to Ethernet converter compatible with Raspberry Pi, Arduino and STM32
Facilitates communication between UART TTL and RJ45 Ethernet, enabling transparent bidirectional data transmission
Includes features such as fast data rate, low power consumption and high stability...
Needless to say, the Raspberry Pi is quite powerful in most cases, but it is not very good at providing accurate PWM output. You may have tried to control a robotic arm or hexapod using the Pi, but are ultimately frustrated because of the limited number of PWM outputs and servo jitter. Now that...
Compatible with Raspberry Pi A, B, A+, B+, Zero, 2, 3 with its L80-39 GPS chipCommunicates satellite data via UART or USBCP2102 as a stable and faster UART chip USB bridge66 simultaneous search channels and 22 tracking channelsAdvanced AGPS EASY™ technology without external memory
USB cable not...
5MP night vision camera with 2 PCS infrared compatible PI3 and higher.
Resolution 1080P.Adjustable focal length: 3.6mm.
Diagonal angle: 60 DegreeComes with connection cablepower 3.3V.
These low-power laser-based time-of-flight sensors have high accuracy and sampling rate, and this particular sensor has a wide detection range, from 4 cm to 4 meters.
Use it as a proximity sensor, for presence detection, or as a laser tape measure! The speed, accuracy and range make this sensor...
Breakout board with integrated Breadboard, ADC inputs, speaker and 1.54" IPS LCD (240x240 px)
Compatible with Raspberry Pi Pico and programmable in C / C ++ and MicroPython
4 x controllable switches, 2 x half-bridge motor drivers, 2 x I2C Breakout Garden sockets
Fully assembled...
Motor driver for Raspberry Pi Pico, ideal for buggy projects
Allows Raspberry Pi Pico to drive two motors simultaneously or a single stepper motor
Includes DRV8833 motor driver IC with short circuit, overcurrent and heat protection
Éequipped with an on/off switch and a power status LED
The SIM7020E is a NarrowBand-Internet of Things (NB-IoT) module specifically designed for the Raspberry Pi Pico and is ideal for IoT applications
Supports multiple NB-IoT frequency bands, UART communication, serial AT command control, support for multiple communication protocols, support...
HighqualityGeekservo motor
Compatible with the famous brick building game
Programmable with Makecode Javascript, microPython, C++
Operating voltage from 3.3 to 6V
It is a low power HAT Raspberry Pi, equipped with multiple communication features: GSM, GPRS, GNSS and Bluetooth.
It allows your Pi to easily make a phone call, send messages, connect to the Internet wirelessly, global position, transfer data via Bluetooth, and so on. GPS antenna not included.
Measure indoor air quality - total volatile organic compounds (TVOC) and equivalent CO2 (eCO2) - with this digital sensor for Raspberry Pi and Arduino.
The SGP30 sensor measures two different types of gases: volatile organic compounds (such as hydrocarbons) and equivalent carbon dioxide (H2...