With this miniature wifi module, free your Internet projects from network cables by adding a wifi module!
Your Raspberry is equipped with a USB port, so you can have a reliable wireless Internet connection at an affordable price.
You will have a wireless Internet connection in 10 minutes!...
I2C digital UV sensor module designed to measure ultraviolet and visible light
Sensitive detection and fast response sensor
Supports interrupt output, programmable upper/lower threshold
Compatible with Raspberry Pi, Arduino, STM32
Allows you to capture stereo audio and store audio recordings made with your Raspberry Pi
Fully preassembled mini HAT expansion board
Pair of I2s microphone, IPS color display with vibration and 4 touch control buttons
Pirate Audio software included
Motor driver card ideal for mobile robots
Équiped with 4 LED lights and 4 test buttons
Regenerative braking provides better control of motor speed
Compatibility with Arduino and Raspberry Pi and micro:bit controllers
GSR (Galvanic Skin Response) sensor to reflect your emotions simply by placing two electrodes next to each other
Ideal for monitoring sleep quality, lie detector, etc.
Adjust sensitivity via potentiometer
Easy-to-read analog voltage output
Featuring the same 5 megapixel OV5647 camera sensor as the original Raspberry Pi v1 Camera Module, this tiny Camera Module will be the perfect companion to your Raspberry Pi 0!
Comes with an integrated camera cable Raspberry Pi Zero and is therefore compatible with the Raspberry Pi 0 only.
Connectivity Raspberry Pi, compatible with Raspberry Pi Zero / Zero W / Zero WH / 2B / 3B / 3B + / 4
CAN function, integrated CAN controller MCP2515 via SPI interface, integrated transceiver SN65HVD230
RS485 function, controlled via UART, half-duplex communication, supports automatic TX / RX...
High capacity servo with all metal gears and 1 bearing
Comes with 3 servo arms
Features :
Weight : 13.4grs
Dimensions: 22.8x12.2x28.5 mm
Torque : 1.8kgs(4.8V)/2.2kgs(6V)
Speed : 0.1sec/60degrees (4.8v)/ 0.08sec/60degrees(6V)
Operating voltage : 4.8V/ 6V
Operating temperature: 0 /+55°
THE ESSENTIAL AUDIO MODULE FOR RASPBEERRY PI 400
GPIO to 3.5mm jack adapter module, with GPIO extension included (DBR400M only) to keep pins accessible
Adds 1 microphone input, 1 stereo line input (DBR400M only) and 1 stereo output configurable
Compatible with Raspberry Pi 400 and...
Drive two DC motors simultaneously
Specially designed for Raspberry Pi, this Motor Driver HAT allows you to drive two DC motors at the same time. Controlled via an I2C interface, this accessory is ideal for your intelligent mobile robots.
The official "night" version of the 8MP Camera Module v2, the NoIR Camera v2 is ideal for taking infrared shots, photographing in the dark or in low light conditions.
Based on the same Sony IMX219 sensor and featuring OmniBSI technology, the infrared camera supports up to 3280 x 2464 pixels in...
It is a 2-channel RS232 expansion HAT designed for Raspberry Pi which adopts SC16IS752 + SP3232 solution, with built-in protection circuits such as power supply isolation, ADI magnetic isolation and TVS diode, etc.It is easy to control the 2-channel RS232 via SPI interface. With fast...
This Pan-Tilt Kit is the perfect way to give your project a full range of programmable motion. The pan-tilt can rotate approximately 180° from side to side and can tilt up and down around 150°. Comes in a kit with two included 38mm x 36mm micro servo motors (GS-90 or GS-92 Type) and space to...
Ideal for improving the efficiency and speed of read/write transfer rates of Compute Module 4
Multi PCI-E compatible (PCI-E × 1 / × 4 / × 8 / × 16)
Compatible with various sizes of M.2* SSDs (2230, 2242, 2260, 2280)
On-board Operation LED indicator: Power on; read / write
*SDD holding...
Official antenna Raspberry Pi certified compatible for the Compute Module 4
Allows to increase the reception range of a Wi-Fi signal
Stabilizes and limits the loss of Wi-Fi data rates
Includes a bracket and a connection cable for the antenna
Extension with multiple sensors (temperature, humidity, magnetometer…), a 64x64 LED matrix, and a mini joystick.
Designed for measurements, experiments and Python programming
Easily connects to the Raspberry Pi via the 40 GPIO pins
Compatible with the Raspberry Pi 5, as well as...
Pimoroni has developed a small and elegant, fully adjustable stand for the camera Raspberry Pi!
This bracket is ideal for the desk or with a tripod.
The kit comes with 5 x M2 nuts, 5 x M2 bolts and 2 x black acrylic mounting plates.
Featuring the same 5 megapixel OV5647 camera sensor as the original Raspberry Pi v1 Camera Module, this tiny Camera Module will be the perfect companion to your Raspberry Pi 0!
Comes with an integrated camera cable Raspberry Pi Zero and is therefore compatible with the Raspberry Pi 0 only.