Camera Raspberry Pi Global Shutter with Sony IMX296 sensor of 1.6 Megapixels
Embeds a global shutter system
Identical form factor to the official HQ camera (version with CS support)
Designed for applications requiring accurate imaging in fast moving conditions (such as...
Increase the power of your Raspberry
The Li-ion HAT battery enhances the capabilities of your Raspberry with an additional 5V power supply. From a 14500 lithium battery, you can easily transport your Raspberry. This versatile module can also be used with other 5V devices.
A really sophisticated and accurate color and luminance sensor that is compatible with Raspberry Pi and Arduino. In addition to detecting RGB color and light level, it rejects 50/60Hz light noise, has a wide detection range and two LEDs for illumination.
This type of sensor is the same one you...
This HAT for Raspberry Pi 5 combines Power over Ethernet (PoE) with ultra-fast NVMe storage
Built-in PoE+ connector and M.2 M-Key connector for simultaneous use
Provides the necessary 5V/5A power to your Raspberry Pi 5
Compatible with the official SSD and MakerDisk
To take beautiful shots with your camera Raspberry Pi, this tripod will help you to place your module in every corner!
Compatible with v2 Camera Modules Raspberry Pi (does not support the official v3 camera module factor)
Camera stand not included.
This ADS1015 ADC (analog-to-digital converter) package has three channels that can read voltages from -24 V to +24 V at sampling rates up to 3.3 KHz with 12-bit resolution.
It is compatible with Raspberry Pi and Arduino and is ideal for measuring voltages quickly and accurately over a wide...
High performance camera in a small package
The Arducam Mini Module Camera Shield 5 MP Plus OV5642, is an easy-to-use high-definition camera with great performance. Reducing the complexity of the camera control interface, this mini module also features an open source code library. Thanks to its...
The Pi Cobbler Plus is an extension specifically designed for the Raspberry Pi. It can support GPIO, I2C and SPI thanks to its 40 pins head on a solderless board. This kit will allow you to easily build many prototypes with the Raspberry Pi!
Special right angle breakout module for Pi 400
Easy installation without soldering
Offers 3 additional breakouts 2x I2C (5 pins) + 1x SPI (5 pins)
Reverse polarity protection (integrated in the breakouts)
This camera supports night vision and can focus accurately. It is equipped with oV5647 Pi 5 megapixel sensor.
Supports the connection of infrared LEDs and/or LED flash.
Add a tracker to your Raspberry
For an optimal use of your Raspberry Pi, you can install a tracking module. This infrared reflection sensor can be used for: electricity meter, paper detection in printer, barrier detection, black and white line detection..
This expansion board connects to a Raspberry Pi Zero or Zero W via pogo pins to provide a full-size USB Type-A connector.You can turn a Raspberry pi zero or Raspberry pi zero W into a U drive via the P4wnP1 project (https://github.com/mame82/P4wnP1), and also use it as a BadUSB device)....
Raspberry Pi + LoRa (TM) expansion board with HopeRF LoRa (TM) radio module(s) installed.
Comes with appropriate manifold and spacers, SMA and modules installed. The first module purchased will be installed in slot CE1, the second in slot CE0. If you plan to use this board in conjunction with...
Designed for Raspberry Pi Pico, ideal for robotic projects
Allows Raspberry Pi Pico to drive 4 motors simultaneously or 2 stepper motors
27 I/O pins available to add other devices such as sensors, LEDs, etc.
Equippedwith an on/off switch and a power status LED
Plug-and-play cable extension kit designed specifically for V1, V2, V3, HQ Camera / Global Shutter Camera modules
Extends the cable length between the camera module Raspberry Pi and the computer by more than 10 meters, using a standard LAN cable
Compatible with Raspberry Pi 5,...
The RemotePi card is an infrared remote control with on/off button.
This card is mainly unitlised on a media center or emulator, LibreELEC, OpenELEC, OSMC, XBian, RasPlex, Raspbian, Volumio, RetroPie, Recalbox ...
This infrared remote control will allow you to navigate through the menus of your...
A fast and accurate environmental sensor that can measure temperature, pressure and altitude.
If you're looking for a simple temperature and pressure sensor, then this is the one to choose.Accurate (± 1 hPa, ± 1.0 ° C, ± 1 meter), and ideal for keeping track of temperatures around your home or...
The extension cable allows Raspberry Pi to connect two cameras at the same time and to select which one is active manually or automatically (via GPIO)
Dimensions: 76mm x 26mm
Applicable range: full serial cards Raspberry Pi
NOT APPLICABLE: one IMX219 8MP camera + one OV5647 5MP camera
Increase the capabilities of your Raspberry Pi
The original Raspberry Pi has only one UART port with 1 channel. With this serial extension, you have a UART with two channels as well as 8 GPIOs programmable via I2C. The LEDs integrated in the extension allow you to monitor the UART operating status.