ARDUINO MKR 485 SHIELD
Want to add serial communications to your device using the RS-485 protocol? The Arduino MKR 485 shield will provide the industrial connectivity you need.
- On sale!
- Out-of-Stock
Want to add serial communications to your device using the RS-485 protocol? The Arduino MKR 485 shield will provide the industrial connectivity you need.
The Modulino Latch Relay is a bistable relay module designed to add a compact and reliable power switch to your automation, home automation, or IoT projects Based on the standard Modulino form factor, this module integrates in seconds with an Arduino UNO R4 WiFi, UNO Q, Nano R4, Nesso...
1,28" (240x240px) round backlit IPS LCD screen, 65K RGB Compatible Raspberry Pi, Arduino, STM32, ... Integrated GC9A01 driver, connection and control via SPI interface 20cm PH2.0 8PIN cable included
This 3000mAh lithium-polymer battery is ideal for embedded and IoT projects, for powering displays or sensory modules Its compact 8 × 50 × 60 mmformat enables easy integration in small spaces, such as small enclosures or IoT devices. Integrated PCM circuitry protects against...
IP68 waterproof ABS plastic protection for resistance to water and dust Ideal for creating a waterproof home automation box, or for wildlife observation projects Format compatible with Raspberry Pi, Arduino, LattePanda (v1),... Convenient screw mounting included for easy...
High-quality anodised aluminium case designed specifically for Arduino UNO Q, combining durability with easy access to all GPIO pins, Wi-Fi, LEDs and connectors Open-frame structure allows uninterrupted Wi-Fi signal transmission and full visibility of indicators and pin labels, simplifying...
SanDisk SDXC Class 10 UHS-1 Micro-SD card Up to 100MB/s transfer speed to allow you to move up to 1,200 photos in one minute Perfectly suited for Raspberry Pi and all other products like Android smartphones and tablets Available in 6 versions: 16 GB, 32 GB, 64 GB, 128 GB, 256 GB,...
6 x AA battery holder that turns six 1.5 V batteries into a stable power source for your Arduino or CUBLOC projects, with no complicated wiring Built-in DC connector with included cable for a quick, secure connection to your favorite electronic boards 14.5 cm (5.7 in) length, a...
8x8 LED matrix display based on chip HT16K33 Simply use the I2C port of your microcontroller to control the dot matrix Address setting via switch Wire connection via jumper cable
E-paper module with 2.9" SPI interface in 3 colors (red, black, white) Ideal for price tags, shelf labels, industrial instruments Low power, wide viewing angle, paper-like display without electricity Compatible with Raspberry Pi, Jetson Nano, Arduino, STM32, etc.
only one module can drive an 8x8 dot common cathode array Operating voltage: 5V Module size: 12.8 x 3.2 x 1.3 cm (l * w * h) with 64 screw mounting holes, hole diameter: 3mm module with input and output interfaces, support multiple modules in cascade
Sharpness, high resolution, wide viewing angles (IPS), this 1.3 " square color LCD screen, 240x240 pixels, will add spice to your projects Raspberry Pi or Arduino. A very sharp and bright screen thanks to its wide viewing angles and protected against polarity inversion.
The Arduino MKR RGB Shield puts 84 LEDs (12x7) at your service! Write messages and add graphics with this shield Very dense and bright LEDs with full RGB colors No need for soldering or adapters, just plug the RGB Shield into your favorite MKR board
Transparent case for Arduino Mega Rev 3 with accessible headers Material: Acrylic (2.8 mm) Weight: 60 g Dimensions: 10 x 3.4 cm
A handy little LCD screen for adding readouts to your projects. This 0.96" SPI LCD has a 2:1 aspect ratio, wide viewing angles (IPS) and works with Raspberry Pi or Arduino. It is bright, has excellent resolution and you will be able to display small information such as timers, clocks, sensor...
A bright and clear 1.12" OLED display ideal for adding a small screen to your project. This 128 x 128 pixel white/black monochrome display is ideal for graphing, reading and displaying basic icons. OLEDs have the advantage of being extremely bright and readable, with great contrast. Because this...
A bright and clear 1.12" OLED display ideal for adding a small screen to your project. This 128 x 128 pixel white/black monochrome display is ideal for graphing, reading and displaying basic icons. OLEDs have the advantage of being extremely bright and readable, with great contrast. Because...
The Nokia 5110 is a basic graphical LCD display for many applications. It uses the PCD8544 controller, which is the same used in the Nokia 3310 LCD. All the functions needed for the display are provided in a single chip, including the on-chip generation of the LCD, power supply and bias voltages,...
Case for Arduino Mega Rev 3 Material: ABS Weight: 100 g Dimensions: 12 x 9 x 5 cm
Real time clock with battery to keep time even when your project is off or while you reprogram your microcontroller. The breakout is perfect for time dependent projects, timers, alarms, etc. The DS1307 is the most popular RTC, and works perfectly with 5V microcontrollers such asArduino. This...
Transparent housing for Arduino Uno Rev3 with accessible pins Material: Acrylic or molded ABS Weight: 65 g
16x2 LCD display and 6-button keyboard Display on 2 lines of 16 characters, and keyboard with 6 push buttons Directly compatible with all cards Arduino
This super cute 5x5 RGB LED matrix board is a great way to visualize sensor data or for simple animations or notifications, and is compatible with Raspberry Pi and Arduino. These small arrays are great for viewing data from other boards in a Breakout Garden HAT, such as the environmental data...
It is a serial interface E-paper display module, 4.3 inches, 800 × 600 resolution, with integrated font libraries, ultra low power consumption.